11 open source boards using the AHT20_C2757850

Real designs built with the AHT20_C2757850, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the AHT20_C2757850

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the AHT20_C2757850 connects to, and the resistors, capacitors and other passives placed on it.

  • The SCL pin has a pull-up to 3.3V on 6 of 7 designs, most often 10 kΩ (then 4.7 kΩ).
  • The SDA pin has a pull-up to 3.3V on 6 of 7 designs, most often 10 kΩ (then 4.7 kΩ).
  • The VDD pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 10 µF).
NCpin 1, 6Connected to: Not connected 100%
VDDpin 2Connected to: 3.3V 57% · a signal 43%
  • Decoupling capacitor on 57% · 100 nF (3), 10 µF (3)
SCLpin 3Connected to: The microcontroller 71%, a connector 29%
  • Pull-up to 3.3V on 86% · 10 kΩ (5), 4.7 kΩ (3)
SDApin 4Connected to: The microcontroller 71%, a connector 29%
  • Pull-up to 3.3V on 86% · 10 kΩ (5), 4.7 kΩ (3)
GNDpin 5Connected to: GND 100%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esp32-led controller by arkandas, SolarDataLogger by brokebit, Smart peltier driver esp32-v1 by manhoosbilli1 and Ambient air by mawoka-myblock.

The AHT20_C2757850 in open source designs

The gallery holds 11 open source boards using the AHT20_C2757850 from 7 GitHub repositories; a typical one measures about 73 × 75 mm and carries around 61 components.

82% are two-layer designs, the rest use four layers or more, and 27% carry an open source license.

The most starred is Esp32-led controller by arkandas.

Parts used alongside the AHT20_C2757850

Microcontrollers on boards using the AHT20_C2757850

AHT20_C2757850: common questions

Where can I find a AHT20_C2757850 reference design?

Each of the 11 boards on this page is a real design using the AHT20_C2757850. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the AHT20_C2757850 SCL pin?

The SCL pin has a pull-up to 3.3V on 6 of 7 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 7 open source designs using the AHT20_C2757850.

What pull-up resistor is used on the AHT20_C2757850 SDA pin?

The SDA pin has a pull-up to 3.3V on 6 of 7 designs, most often 10 kΩ (then 4.7 kΩ). Counted from the KiCad layouts of 7 open source designs using the AHT20_C2757850.

What decoupling capacitors do designs use on the AHT20_C2757850 VDD pin?

The VDD pin has a decoupling capacitor on 4 of 7 designs, most often 100 nF (then 10 µF). Counted from the KiCad layouts of 7 open source designs using the AHT20_C2757850.

Which microcontrollers do boards using the AHT20_C2757850 use?

Most are built on ESP32 (7), RP2040/RP2350 (1) and STM32 (1).

How big is a typical board using the AHT20_C2757850?

The median is 73 × 75 mm, and 82% are two-layer designs.

What is the most popular open source board using the AHT20_C2757850?

By GitHub stars, Esp32-led controller by arkandas, with 5 stars.

Can I simulate one of these boards using the AHT20_C2757850 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part