Audio breakout
brucemack·sdr2·hw/audio-breakout/audio-breakout.kicad_pcb
About the Audio breakout
Audio breakout is an open source PCB design by brucemack, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 76.3 × 41.5 mm, with 29 components from 15 distinct parts.
Other key parts include the PCM5100 and PCM1804DBR. By type, the board carries 19 capacitors, 5 connectors, 2 ICs, 2 resistors and 1 inductor.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.
This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.
Build/Debug Commands ====================
git submodule update --init mkdir build cd build cmake -DPICO_BOARD=pico2 ..
~/git/openocd/src/openocd -s ~/git/openocd/tcl -f interface/cmsis-dap.cfg -f target/rp2350.cfg -c "adapter speed 5000" -c "rp2350.dap.core1 cortexm resetconfig sysresetreq" -c "program main.elf verify reset exit"

Main components on the Audio breakout
Audio breakout bill of materials (BOM)
29 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCM5100 | TSSOP-20_4.4x6.5mm_P0.65mm | U1 |
| 1 | PCM1804DBR | SSOP-28_5.3x10.2mm_P0.65mm | U2 |
| 1 | Conn_01x03 | PinSocket_1x03_P2.54mm_Vertical | J1 |
| 1 | Conn_01x04 | PinSocket_1x04_P2.54mm_Vertical | J2 |
| 1 | Conn_01x05 | PinSocket_1x05_P2.54mm_Vertical | J3 |
| 2 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J4, J5 |
| 1 | 47u | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 4 | 0.1uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C4, C7 |
| 2 | 2.2uF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5 |
| 1 | 10uF | CP_Radial_D4.0mm_P2.00mm | C6 |
| 2 | 2.2nF | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8, C9 |
| 4 | 10u | CP_Radial_D4.0mm_P2.00mm | C10, C13, C16, C18 |
| 4 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C14, C17, C19 |
| 2 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C12, C15 |
| 2 | 470 | R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
Audio breakout design files
The KiCad project lives in the brucemack/sdr2 repository on GitHub; these links point at the commit this page was built from.
Audio breakout: common questions
How big is the Audio breakout?
The Audio breakout measures 76.3 × 41.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Audio breakout?
29 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Audio breakout design files?
From the brucemack/sdr2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Audio breakout design in my own project?
Yes, under the terms of its GPL-3.0 license, which brucemack chose for the repository.
More boards in sdr2
Quadrature TX/RX Board
brucemack
70 × 100 mm92 parts4LGPL-3.00Tx-1
brucemack
68 × 41 mm51 parts2LGPL-3.00Kc1fsz rx6
brucemack
60.3 × 46.5 mm48 parts2LGPL-3.00Utility Board 1
brucemack
50 × 80 mm41 parts2LGPL-3.00Band Pass Filter 1
brucemack
25 × 70 mm23 parts2LGPL-3.00PCM1804 Breakout Board
brucemack
34.8 × 29 mm16 parts2LGPL-3.00
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k