Utility Board 1

brucemack·sdr2·hw/util-1/util-1.kicad_pcb

Utility Board 1 layout, top view — open source board by brucemack

About the Utility Board 1

Utility Board 1 is an open source PCB design by brucemack, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 50 × 80 mm, with 41 components from 27 distinct parts.

Other key parts include the NCP1117-5.0_SOT223, NCP1117-3.3_SOT223, MAX4466EXK and TS5A3159ADBVR. By type, the board carries 13 capacitors, 10 resistors, 9 connectors, 6 ICs, 1 diode and 1 inductor.

It belongs with the audio designs in this gallery.

From the project

This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.

This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.

Build/Debug Commands ====================

git submodule update --init mkdir build cd build cmake -DPICO_BOARD=pico2 ..

~/git/openocd/src/openocd -s ~/git/openocd/tcl -f interface/cmsis-dap.cfg -f target/rp2350.cfg -c "adapter speed 5000" -c "rp2350.dap.core1 cortexm resetconfig sysresetreq" -c "program main.elf verify reset exit"

Utility Board 1, from the project README
From the project README

Main components on the Utility Board 1

Utility Board 1 bill of materials (BOM)

41 components, 27 distinct parts.

QtyPartRefs
1
~
U1
1
NCP1117-5.0_SOT223
U2
1
NCP1117-3.3_SOT223
U3
1
MAX4466EXK
U4
2
TS5A3159ADBVR
U5, U6
3
Conn_01x02
J1, J4, J6
1
Conn_01x03
J2
2
Conn_01x06
J3, J5
1
5V
J7
1
3.3V
J8
1
BATT
J9
1
100k
RV1
1
Red
D1
1
FerriteBead
FB1
4
10u
C1, C2, C5, C6
1
0.39uF
C3
1
1.0uF
C4
1
NC
C7
3
0.1uF
C8, C10, C13
1
0.01uF
C9
Show 7 more
QtyPartRefs
1
10uF
C11
1
100pF
C12
2
20k
R1, R3
1
100
R2
4
1k
R4, R5, R6, R9
2
1M
R7, R8
1
22k
R10

Utility Board 1 design files

The KiCad project lives in the brucemack/sdr2 repository on GitHub; these links point at the commit this page was built from.

Utility Board 1: common questions

How big is the Utility Board 1?

The Utility Board 1 measures 50 × 80 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Utility Board 1?

41 components, from 27 distinct parts. The full bill of materials is listed on this page.

Where can I download the Utility Board 1 design files?

From the brucemack/sdr2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Utility Board 1 design in my own project?

Yes, under the terms of its GPL-3.0 license, which brucemack chose for the repository.

More boards in sdr2

Similar boards