Band Pass Filter 1
brucemack·sdr2·hw/bpf-1/bpf-1.kicad_pcb
About the Band Pass Filter 1 PCB
Band Pass Filter 1 is an open source PCB design by brucemack, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 25 × 70 mm, with 23 components from 12 distinct parts.
Other key parts include the SN74CBT3253. By type, the board carries 15 capacitors, 4 inductors, 3 connectors and 1 IC.
It belongs with the audio designs in this gallery.
From the project
This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.
This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.
Build/Debug Commands ====================
git submodule update --init mkdir build cd build cmake -DPICO_BOARD=pico2 ..
~/git/openocd/src/openocd -s ~/git/openocd/tcl -f interface/cmsis-dap.cfg -f target/rp2350.cfg -c "adapter speed 5000" -c "rp2350.dap.core1 cortexm resetconfig sysresetreq" -c "program main.elf verify reset exit"

Main components on the Band Pass Filter 1
Band Pass Filter 1 bill of materials (BOM)
23 components, 12 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | SN74CBT3253 | SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | Conn_01x04 | PinHeader_1x04_P2.54mm_Vertical | J1 |
| 2 | Conn_01x02 | PinHeader_1x02_P2.54mm_Vertical | J2, J3 |
| 4 | 1.4u | FT37-43 Unifilar | L1, L2, L3, L4 |
| 2 | 77p | C_0805_2012Metric_HandSolder | C1, C5 |
| 2 | 260p | C_0805_2012Metric_HandSolder | C2, C4 |
| 1 | 18p | C_0805_2012Metric_HandSolder | C3 |
| 4 | C_Variable | VCAP_GKG30086-05_SGM-L | C6, C7, C9, C12 |
| 2 | 26p | C_0805_2012Metric_HandSolder | C8, C14 |
| 2 | 150p | C_0805_2012Metric_HandSolder | C10, C13 |
| 1 | 5p | C_0805_2012Metric_HandSolder | C11 |
| 1 | 0.1u | C_0805_2012Metric_HandSolder | C15 |
Band Pass Filter 1 design files
The KiCad project lives in the brucemack/sdr2 repository on GitHub; these links point at the commit this page was built from.
- Layouthw/bpf-1/bpf-1.kicad_pcb
- Schematichw/bpf-1/bpf-1.kicad_sch
Band Pass Filter 1: common questions
How big is the Band Pass Filter 1 PCB?
The Band Pass Filter 1 measures 25 × 70 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Band Pass Filter 1?
23 components, from 12 distinct parts. The full bill of materials is listed on this page.
Where can I download the Band Pass Filter 1 design files?
From the brucemack/sdr2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Band Pass Filter 1 design in my own project?
Yes, under the terms of its GPL-3.0 license, which brucemack chose for the repository.
More boards in sdr2
Quadrature TX/RX Board
brucemack
70 × 100 mm92 parts4LGPL-3.00Tx-1
brucemack
68 × 41 mm51 parts2LGPL-3.00Kc1fsz rx6
brucemack
60.3 × 46.5 mm48 parts2LGPL-3.00Utility Board 1
brucemack
50 × 80 mm41 parts2LGPL-3.00Audio breakout
brucemack
76.3 × 41.5 mm29 parts2LGPL-3.00PCM1804 Breakout Board
brucemack
34.8 × 29 mm16 parts2LGPL-3.00
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2kButtonsLEDs
shanteacontrols
390 × 37 mm82 parts2LApache-2.0956USB
shanteacontrols
52 × 12.6 mm6 parts2LApache-2.0956Pots
shanteacontrols
390 × 93 mm75 parts2LApache-2.0956PicoGUS Hand386
polpo
29.2 × 75.2 mm43 parts4LGPL-2.0800Snark barker
schlae
231.1 × 106.7 mm193 parts2LNo license687