PCM1804 Breakout Board
brucemack·sdr2·hw/kc1fsz-rx7/kc1fsz-rx7.kicad_pcb
About the PCM1804 Breakout Board
PCM1804 Breakout Board is an open source PCB design by brucemack, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 34.8 × 29 mm, with 16 components from 9 distinct parts.
Other key parts include the PCM1804DBR. By type, the board carries 10 capacitors, 4 connectors, 1 IC and 1 inductor.
It belongs with the audio and dev boards & breakouts designs in this gallery.
From the project
This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.
This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.
Build/Debug Commands ====================
git submodule update --init mkdir build cd build cmake -DPICO_BOARD=pico2 ..
~/git/openocd/src/openocd -s ~/git/openocd/tcl -f interface/cmsis-dap.cfg -f target/rp2350.cfg -c "adapter speed 5000" -c "rp2350.dap.core1 cortexm resetconfig sysresetreq" -c "program main.elf verify reset exit"

Main components on the PCM1804 Breakout Board
PCM1804 Breakout Board bill of materials (BOM)
16 components, 9 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | PCM1804DBR | SSOP-28_5.3x10.2mm_P0.65mm | U1 |
| 1 | IQ | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | Power | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | Config | PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | Conn_01x06 | PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | 47u | L_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L1 |
| 4 | 0.1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C4, C6, C8 |
| 4 | 10u | CP_Radial_D4.0mm_P2.00mm | C2, C3, C5, C7 |
| 2 | 1u | C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10 |
PCM1804 Breakout Board design files
The KiCad project lives in the brucemack/sdr2 repository on GitHub; these links point at the commit this page was built from.
PCM1804 Breakout Board: common questions
How big is the PCM1804 Breakout Board?
The PCM1804 Breakout Board measures 34.8 × 29 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the PCM1804 Breakout Board?
16 components, from 9 distinct parts. The full bill of materials is listed on this page.
Where can I download the PCM1804 Breakout Board design files?
From the brucemack/sdr2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the PCM1804 Breakout Board design in my own project?
Yes, under the terms of its GPL-3.0 license, which brucemack chose for the repository.
More boards in sdr2
Quadrature TX/RX Board
brucemack
70 × 100 mm92 parts4LGPL-3.00Tx-1
brucemack
68 × 41 mm51 parts2LGPL-3.00Kc1fsz rx6
brucemack
60.3 × 46.5 mm48 parts2LGPL-3.00Utility Board 1
brucemack
50 × 80 mm41 parts2LGPL-3.00Audio breakout
brucemack
76.3 × 41.5 mm29 parts2LGPL-3.00Band Pass Filter 1
brucemack
25 × 70 mm23 parts2LGPL-3.00
Similar boards
KLOR
GEIGEIGEIST
160.2 × 118.3 mm79 parts2LGPL-3.01.2k134pin 7-967288-1
rusefi
139.7 × 73.7 mm38 parts2LGPL-3.01.2kBreakout 60pin EEC-IV
rusefi
139.7 × 62.2 mm15 parts2LGPL-3.01.2k88 Pin Vag Breakout
rusefi
142 × 58 mm91 parts2LGPL-3.01.2kEecv breakout
rusefi
140.8 × 53.7 mm9 parts4LGPL-3.01.2kBreakout 112pin Connector
rusefi
174 × 58 mm39 parts2LGPL-3.01.2k