Tx-1

brucemack·sdr2·hw/tx-1/tx-1.kicad_pcb

Tx-1 PCB layout, top view — open source board by brucemack

About the Tx-1 PCB

Tx-1 is an open source PCB design by brucemack, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 68 × 41 mm, with 51 components from 15 distinct parts.

Other key parts include the LM4562 and SN74CBT3253. By type, the board carries 25 capacitors, 18 resistors, 4 connectors and 3 ICs.

It belongs with the audio designs in this gallery.

From the project

This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.

This is a homebrew SDR rig with no dependency on external computers/soundcards/etc.

Build/Debug Commands ====================

git submodule update --init mkdir build cd build cmake -DPICO_BOARD=pico2 ..

~/git/openocd/src/openocd -s ~/git/openocd/tcl -f interface/cmsis-dap.cfg -f target/rp2350.cfg -c "adapter speed 5000" -c "rp2350.dap.core1 cortexm resetconfig sysresetreq" -c "program main.elf verify reset exit"

Tx-1, from the project README
From the project README

Main components on the Tx-1

Tx-1 bill of materials (BOM)

51 components, 15 distinct parts.

QtyPartRefs
2
LM4562
U1, U2
1
SN74CBT3253
U3
2
Conn_01x04
J1, J3
2
Conn_01x02
J2, J4
1
Trifilar FT37-43
TR1
6
10uF
C1, C6, C9, C13, C17, C18
2
1000pF
C2, C11
9
0.1uF
C3, C5, C8, C12, C14, C16, C21, C22 +1
2
100pF
C4, C15
4
0.022uF
C7, C10, C19, C20
2
4.7uF
C23, C24
8
10k
R1, R2, R3, R4, R7, R8, R9, R10
6
50
R5, R6, R11, R12, R15, R16
3
2.2k
R13, R17, R18
1
3.3k
R14

Tx-1 design files

The KiCad project lives in the brucemack/sdr2 repository on GitHub; these links point at the commit this page was built from.

Tx-1: common questions

How big is the Tx-1 PCB?

The Tx-1 measures 68 × 41 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Tx-1?

51 components, from 15 distinct parts. The full bill of materials is listed on this page.

Where can I download the Tx-1 design files?

From the brucemack/sdr2 repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Tx-1 design in my own project?

Yes, under the terms of its GPL-3.0 license, which brucemack chose for the repository.

More boards in sdr2

Similar boards