8 open source boards using the W65C22NxP
Real designs built with the W65C22NxP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Vic2020mainboard
danwerner21
357.8 × 124.5 mm127 parts2LNo license78We816
danwerner21
360.1 × 141.4 mm128 parts2LNo license326502Rev2
stuenkels
102 × 102 mm60 parts4LNo license11Ifle3-symrna
barkolorious
184.9 × 112 mm27 parts2LNo license3RP2040/RP2350
We816-mark2
danwerner21
360.1 × 141.4 mm128 parts2LNo license1AVR/Arduino
CR2021 CPU v2
derpflanz
178.4 × 115.6 mm43 parts2LNo license0RP2040/RP2350
6809-v0
bwindrim
152.4 × 101.6 mm7 parts2LNo license0Via
atarola
102.5 × 30 mm8 parts2LNo license0
How designs wire the W65C22NxP
Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the W65C22NxP connects to, and the resistors, capacitors and other passives placed on it.
- The RES pin has a pull-up to VCC on 4 of 7 designs, most often 1 kΩ.
- The PA0 pin has a pull-up to VCC on 3 of 7 designs, most often 1 kΩ.
- The PA1 pin has a pull-up to VCC on 3 of 7 designs, most often 1 kΩ.
- The Φ2 pin has a crystal on 3 of 7 designs, most often 1 MHz.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| VSSpin 1 | Connected to: GND 86% | — |
| PA0pin 2 | Connected to: A connector 71%, 7406 43% · not connected 29% |
|
| PA1pin 3 | Connected to: A connector 71%, 7406 43% · not connected 29% |
|
| VCCpin 20 | Connected to: VCC 86% | — |
| Φ2pin 25 | Connected to: 658C16 29%, 74LS244 29%, 74HC00 29% |
|
| RESpin 34 | Connected to: 658C16 29%, AY-3-8910 29%, W65C02SxP 29% |
|
34 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Vic2020mainboard by danwerner21, We816 by danwerner21, 6502Rev2 by stuenkels and Ifle3-symrna by barkolorious.
The W65C22NxP in open source designs
The gallery holds 8 open source boards using the W65C22NxP from 8 GitHub repositories; a typical one measures about 181.7 × 113.8 mm and carries around 52 components.
88% are two-layer designs, the rest use four layers or more, and 0% carry an open source license.
The most starred is Vic2020mainboard by danwerner21.
Parts used alongside the W65C22NxP
Microcontrollers on boards using the W65C22NxP
What boards using the W65C22NxP are built for
W65C22NxP: common questions
Where can I find a W65C22NxP reference design?
Each of the 8 boards on this page is a real design using the W65C22NxP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What pull-up resistor is used on the W65C22NxP RES pin?
The RES pin has a pull-up to VCC on 4 of 7 designs, most often 1 kΩ. Counted from the KiCad layouts of 7 open source designs using the W65C22NxP.
What pull-up resistor is used on the W65C22NxP PA0 pin?
The PA0 pin has a pull-up to VCC on 3 of 7 designs, most often 1 kΩ. Counted from the KiCad layouts of 7 open source designs using the W65C22NxP.
What pull-up resistor is used on the W65C22NxP PA1 pin?
The PA1 pin has a pull-up to VCC on 3 of 7 designs, most often 1 kΩ. Counted from the KiCad layouts of 7 open source designs using the W65C22NxP.
What parts are used alongside the W65C22NxP?
The MAX232, 7406, 74LS245, W65C02SxP and W65C51NxP appear in the most repositories here.
Which microcontrollers do boards using the W65C22NxP use?
Most are built on RP2040/RP2350 (2) and AVR/Arduino (1).
How big is a typical board using the W65C22NxP?
The median is 181.7 × 113.8 mm, and 88% are two-layer designs.
What is the most popular open source board using the W65C22NxP?
By GitHub stars, Vic2020mainboard by danwerner21, with 78 stars.
Can I simulate one of these boards using the W65C22NxP before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.