9 open source boards using the W65C51NxP

Real designs built with the W65C51NxP, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

9 boardsClear filters|Most starred

How designs wire the W65C51NxP

Read from the KiCad layouts of 7 open source designs, one per repository: what each pin of the W65C51NxP connects to, and the resistors, capacitors and other passives placed on it.

  • The XTAL1 pin has a crystal on 6 of 7 designs, most often 1.8432 MHz.
  • The RXC pin is left unconnected on 6 of 7 designs.
  • The XTAL1 pin has a series resistor on 5 of 7 designs, most often 1 MΩ.
  • The XTAL2 pin has a crystal on 5 of 7 designs, most often 1.8432 MHz.
VSSpin 1Connected to: GND 86%
RESpin 4Connected to: W65C02SxP 43%, a connector 43%, W65C22NxP 29%
  • Pull-up to 5V on 43% · 1 kΩ (2), 2 MΩ (1), 3 kΩ (1)
RXCpin 5Connected to: Not connected 86%
XTAL1pin 6Connected to: Signal 100%
  • Crystal on 86% · 1.8432 MHz (5)
  • Series resistor on 71% · 1 MΩ (5)
  • Capacitor to GND on 57% · 30 pF (2), 20 pF (2)
XTAL2pin 7Connected to: Signal 86%
  • Crystal on 71% · 1.8432 MHz (4)
  • Series resistor on 71% · 1 MΩ (5)
RTSpin 8Connected to: Not connected 71% · a signal 29%
DTRpin 11Connected to: Not connected 71% · a signal 29%
VCCpin 15Connected to: 5V 86%
  • Decoupling capacitor on 43% · 10 µF (2), 100 nF (2)
Φ2pin 27Connected to: W65C02SxP 43%, 74HC00 29%, W65C22NxP 29%
  • Crystal on 57% · 1 MHz (2), 16 MHz (1)

19 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 6502Rev2 by stuenkels, ByteCradle 6502 TINY by ifilot, Ifle3-symrna by barkolorious and 65c816-pcbs by erikarn.

The W65C51NxP in open source designs

The gallery holds 9 open source boards using the W65C51NxP from 8 GitHub repositories; a typical one measures about 102.5 × 100 mm and carries around 36 components.

56% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is 6502Rev2 by stuenkels.

Microcontrollers on boards using the W65C51NxP

What boards using the W65C51NxP are built for

W65C51NxP: common questions

Where can I find a W65C51NxP reference design?

Each of the 9 boards on this page is a real design using the W65C51NxP. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the W65C51NxP XTAL1 pin connected?

The XTAL1 pin has a crystal on 6 of 7 designs, most often 1.8432 MHz. Counted from the KiCad layouts of 7 open source designs using the W65C51NxP.

How is the W65C51NxP RXC pin connected?

The RXC pin is left unconnected on 6 of 7 designs. Counted from the KiCad layouts of 7 open source designs using the W65C51NxP.

How is the W65C51NxP XTAL2 pin connected?

The XTAL2 pin has a crystal on 5 of 7 designs, most often 1.8432 MHz. Counted from the KiCad layouts of 7 open source designs using the W65C51NxP.

What parts are used alongside the W65C51NxP?

The 28C256, W65C02SxP, CY62256-70PC, MAX232 and W65C22NxP appear in the most repositories here.

Which microcontrollers do boards using the W65C51NxP use?

Most are built on AVR/Arduino (1) and RP2040/RP2350 (1).

How big is a typical board using the W65C51NxP?

The median is 102.5 × 100 mm, and 56% are two-layer designs.

What is the most popular open source board using the W65C51NxP?

By GitHub stars, 6502Rev2 by stuenkels, with 11 stars.

Can I simulate one of these boards using the W65C51NxP before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part