HardLabs

Fullsized keybored 3v3

calvin-mcd·vdf-fullsized-keybored·Project/fullsized keybored 3v3.kicad_pcb

Fullsized keybored 3v3 PCB layout, top view — open source RP2040/RP2350 board by calvin-mcd

About the Fullsized keybored 3v3 PCB

Fullsized keybored 3v3 is an open source RP2040/RP2350 PCB design by calvin-mcd, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 428.6 × 123.8 mm, with 135 components from 19 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q16JVUXIQ, USBLC6-2SC6 and XC6206PXXXMR-REGULATOR_LINEAR. By type, the board carries 102 diodes, 17 capacitors, 7 resistors, 4 ICs, 1 crystal and 1 connector.

It belongs with the keyboards and displays & leds designs in this gallery.

From the project

fullsized keyboard support vdf display

Main components on the Fullsized keybored 3v3

W25Q16JVUXIQRP2040USBLC6-2SC6XC6206PXXXMR-REGULATOR_LINEAR

Fullsized keybored 3v3 bill of materials (BOM)

135 components, 19 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
W25Q16JVUXIQ
IC1
1
RP2040
U1
1
USBLC6-2SC6
U2
1
XC6206PXXXMR-REGULATOR_LINEAR
XC6206PxxxMR-Regulator_Linear
U3
1
12MHZ
12MHz
Y1
1
USB_C_RECEPTACLE_USB2.0
USB_C_Receptacle_USB2.0
J1
1
500MA
500mA
F1
1
C115351
boot
SW1
1
C115351
Reset
SWR1
102
C81598
D_Small
D1, D2, D3, D4, D5, D6, D7, D8 +94
1
100N
100n
C1
2
22PF
22pF
C2, C3
4
1UF
1uF
C4, C8, C16, C17
9
100N
100nF
C5, C6, C9, C10, C11, C12, C13, C14 +1
1
10UF
10uF
C7
2
27R
R1, R2
2
1k
R4, R8
2
5K1
5k1
R5, R6
1
5K1
5.1k
R7

Fullsized keybored 3v3 design files

The KiCad project lives in the calvin-mcd/vdf-fullsized-keybored repository on GitHub; these links point at the commit this page was built from.

Fullsized keybored 3v3: common questions

What microcontroller does the Fullsized keybored 3v3 use?

The Fullsized keybored 3v3 is built around the RP2040, from the RP2040/RP2350 family.

How big is the Fullsized keybored 3v3 PCB?

The Fullsized keybored 3v3 measures 428.6 × 123.8 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Fullsized keybored 3v3?

135 components, from 19 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Fullsized keybored 3v3 design files?

From the calvin-mcd/vdf-fullsized-keybored repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Fullsized keybored 3v3 design in my own project?

Yes, under the terms of its GPL-3.0 license, which calvin-mcd chose for the repository.

Can I test firmware for the Fullsized keybored 3v3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in vdf-fullsized-keybored

Similar boards