Gdip test tube hardware

camerongrimes·gdip-test-tube-hardware

Gdip test tube hardware PCB layout, top view — open source ESP32 board by camerongrimes

About the Gdip test tube hardware PCB

Gdip test tube hardware is an open source ESP32 PCB design by camerongrimes, published on GitHub. It is a 2-layer board measuring 76.2 × 58.5 mm, with 72 components from 34 distinct parts.

Its main chip is the ESP32-S3-WROOM-1-N16R2, from the ESP32 family. Other key parts include the AMS1117-3.3, CP2102N-Axx-xQFN28, USBLC6-2SC6, 74LVC2G00 and HDSP-7401. By type, the board carries 28 resistors, 12 capacitors, 9 ICs, 7 connectors, 3 transistors and 2 switches.

It belongs with the robotics & motion and iot & wireless designs in this gallery.

From the project

Hardware for GDIP test tube robot

Controller for AL5D Lynxmotion robotic arm.

- Webpage based more control using WiFi from the ESP32. - Six servo outputs for control of all AL5D servos. - Buzzer used to warn user that robotic arm is about to move. - Seven segment display for error codes. - Extra screw terminal for control of safety lightings around the arm.

Gdip test tube hardware, from the project README
From the project README

Main components on the Gdip test tube hardware

Gdip test tube hardware bill of materials (BOM)

72 components, 34 distinct parts.

QtyPartRefs
1
ESP32-S3-WROOM-1-N16R2
U1
1
AMS1117-3.3
U2
1
CP2102N-Axx-xQFN28
U3
2
USBLC6-2SC6
U4, U5
1
74LVC2G00
U6
1
HDSP-7401
U7
1
74AHC595
U8
1
TPS22810DBVT
U9
3
BC818
Q1, Q2, Q3
2
USB_B
J1, J2
2
Screw_Terminal_01x02
J3, J6
1
Conn_01x04
J4
1
Conn_01x03
J5
1
Conn_01x02
J7
1
PKLCS1212E40A1-R1
LS1
6
Conn_01x03_Pin
SERVO_A1, SERVO_B1, SERVO_C1, SERVO_D1, SERVO_E1, SERVO_F1
2
SW_Push
SW1, SW2
2
LED
DEBUG1, PWR1
2
1N5819WS
D2, D3
3
1uF
C1, C3, C7
Show 14 more
QtyPartRefs
4
10uF
C2, C4, C6, C10
3
0.1uF
C5, C8, C9
1
47uF
C11
1
0.001uF
C12
1
22.1k
R1
1
47.5K
R2
3
1K
R3, R16, R17
6
0
R4, R5, R6, R7, R10, R11
3
10k
R8, R9, R12
10
330
R13, R18, R19, R20, R21, R22, R23, R24 +2
1
120K
R14
1
1M
R15
1
4.7k
R26
1
3.9k
R27

Gdip test tube hardware design files

The KiCad project lives in the camerongrimes/gdip-test-tube-hardware repository on GitHub; these links point at the commit this page was built from.

Gdip test tube hardware: common questions

What microcontroller does the Gdip test tube hardware use?

The Gdip test tube hardware is built around the ESP32-S3-WROOM-1-N16R2, from the ESP32 family.

How big is the Gdip test tube hardware PCB?

The Gdip test tube hardware measures 76.2 × 58.5 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Gdip test tube hardware?

72 components, from 34 distinct parts. The full bill of materials is listed on this page.

Where can I download the Gdip test tube hardware design files?

From the camerongrimes/gdip-test-tube-hardware repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Gdip test tube hardware design in my own project?

The repository has no license, so all rights stay with camerongrimes. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Gdip test tube hardware without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards