17 open source boards using the 74AHC595

Real designs built with the 74AHC595, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

17 boardsClear filters|Most starred

How designs wire the 74AHC595

Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the 74AHC595 connects to, and the resistors, capacitors and other passives placed on it.

  • The VCC pin has a decoupling capacitor on 9 of 13 designs, most often 100 nF (then 100 µF).
  • The SRCLR pin is tied to 3.3V on 10 of 13 designs (a signal on 3).
  • The OE pin is tied to GND on 9 of 13 designs (a signal on 4).
  • The QB pin has a series resistor on 7 of 13 designs, most often 330 Ω (then 1 Ω).
QBpin 1Connected to: A connector 31%
  • Series resistor on 54% · 330 Ω (4), 1 Ω (1), 680 Ω (1)
QCpin 2Connected to: A connector 31%
  • Series resistor on 54% · 330 Ω (4), 2 Ω (1), 680 Ω (1)
QDpin 3Connected to: A connector 31%
  • Series resistor on 54% · 330 Ω (4), 3 Ω (1), 680 Ω (1)
QEpin 4Connected to: A connector 31%
  • Series resistor on 54% · 330 Ω (4), 4 Ω (1), 680 Ω (1)
QFpin 5Connected to: A connector 31%
  • Series resistor on 54% · 330 Ω (4), 5 Ω (1), 680 Ω (1)
QGpin 6Connected to: A connector 31%
  • Series resistor on 54% · 330 Ω (4), 6 Ω (1), 680 Ω (1)
QHpin 7Connected to: A connector 23%
  • Series resistor on 54% · 330 Ω (3), 7 Ω (1), 660 Ω (1)
GNDpin 8Connected to: GND 100%
SRCLRpin 10Connected to: 3.3V 77% · a signal 23%
OEpin 13Connected to: GND 69% · a signal 31%
QApin 15Connected to: A connector 31%
  • Series resistor on 54% · 330 Ω (4), 0 Ω (1), 680 Ω (1)
VCCpin 16Connected to: 3.3V 92%
  • Decoupling capacitor on 69% · 100 nF (5), 100 µF (1), 22 µF (1)

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 32Bit shift register by MaltWhiskey, Amkey usb by BASLQC, Quasar SDR by petrinm and DSD BOARD by ERDALECE.

The 74AHC595 in open source designs

The gallery holds 17 open source boards using the 74AHC595 from 13 GitHub repositories; a typical one measures about 101.5 × 65 mm and carries around 39 components.

71% are two-layer designs, the rest use four layers or more, and 65% carry an open source license.

The most starred is 32Bit shift register by MaltWhiskey.

Parts used alongside the 74AHC595

Microcontrollers on boards using the 74AHC595

74AHC595: common questions

Where can I find a 74AHC595 reference design?

Each of the 17 boards on this page is a real design using the 74AHC595. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the 74AHC595 VCC pin?

The VCC pin has a decoupling capacitor on 9 of 13 designs, most often 100 nF (then 100 µF). Counted from the KiCad layouts of 13 open source designs using the 74AHC595.

How is the 74AHC595 SRCLR pin connected?

The SRCLR pin is tied to 3.3V on 10 of 13 designs (a signal on 3). Counted from the KiCad layouts of 13 open source designs using the 74AHC595.

How is the 74AHC595 OE pin connected?

The OE pin is tied to GND on 9 of 13 designs (a signal on 4). Counted from the KiCad layouts of 13 open source designs using the 74AHC595.

Which microcontrollers do boards using the 74AHC595 use?

Most are built on AVR/Arduino (5), FPGA (2), ESP32 (1) and NXP (1).

How big is a typical board using the 74AHC595?

The median is 101.5 × 65 mm, and 71% are two-layer designs.

What is the most popular open source board using the 74AHC595?

By GitHub stars, 32Bit shift register by MaltWhiskey, with 763 stars.

Can I simulate one of these boards using the 74AHC595 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part