M68000-I-SBC
cartheur·M68000-I-SBC·project-10-recovery/68000sbc.kicad_pcb
About the M68000-I-SBC PCB
M68000-I-SBC is an open source PCB design by cartheur, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 127 × 90.8 mm, with 45 components from 28 distinct parts.
Other key parts include the 74HC139, 74HC14, TMP68HC000P-12, AS6C4008-55PCN and 28C256. By type, the board carries 12 capacitors, 8 ICs, 8 resistors, 6 connectors, 6 diodes and 2 crystals.
It belongs with the retro computing designs in this gallery.
From the project
Taking it to the next level
A minimal single-board computer based on the venerable "Texas Cockroach" Motorola 68000 16/32-bit microprocessor.
- 68HC000 processor running at 12MHz - 1MB RAM - 64KB ROM - 16550 UART providing a 5V FTDI serial port - 44-pin IDE connector for CompactFlash card adapter - Connector for SparkFun DS3234 real-time clock - Only two 74HC glue logic chips required
This might be capable of running uClinux, but I haven't tried it!

Main components on the M68000-I-SBC
M68000-I-SBC bill of materials (BOM)
45 components, 28 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HC139 | DIP-16_W7.62mm_Socket | U1 |
| 1 | 74HC14 | DIP-14_W7.62mm_Socket | U2 |
| 1 | TMP68HC000P-12 | DIP-64_W22.86mm_Socket | U3 |
| 2 | AS6C4008-55PCN | DIP-32_W15.24mm_Socket | U4, U6 |
| 2 | 28C256 | DIP-28_W15.24mm_Socket | U5, U7 |
| 1 | TL16C550 | DIP-40_W15.24mm_Socket | U8 |
| 1 | 12MHZ 12MHz | Oscillator_DIP-14 | X1 |
| 1 | 12MHZ 12MHz | Oscillator_DIP-8 | X2 |
| 1 | USB_B | USB_B_OST_USB-B1HSxx_Horizontal | J1 |
| 1 | 5V FTDI SERIAL | PinHeader_1x06_P2.54mm_Horizontal | J2 |
| 1 | RTC (SparkFun BOB-10160) | PinHeader_1x07_P2.54mm_Vertical | J3 |
| 1 | CFCARD/IDE | PinHeader_2x22_P2.00mm_Vertical | J4 |
| 1 | EXPANSION (F.Cu) | PadRow_1x25_P2.54mm | J5 |
| 1 | EXPANSION (B.Cu) | PadRow_1x25_P2.54mm | J6 |
| 1 | POWER SELECT | PinHeader_1x03_P2.54mm_Vertical | JP1 |
| 1 | RESET | SW_PUSH_6mm | SW1 |
| 1 | BTN1 | SW_PUSH_6mm | SW2 |
| 2 | 1N5817 | D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2 |
| 1 | POWER | LED_D5.0mm | D3 |
| 1 | LED | LED_D5.0mm | D4 |
Show 8 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | CARD | LED_D5.0mm | D5 |
| 1 | HALT | LED_D5.0mm | D6 |
| 10 | 0.1UF 0.1uF | C_Rect_L7.0mm_W2.0mm_P5.00mm | C1, C2, C3, C4, C5, C6, C7, C8 +2 |
| 2 | 10uF | CP_Radial_D5.0mm_P2.50mm | C11, C12 |
| 2 | 10K 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R1, R2 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R3 |
| 4 | 1k* | R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R4, R5, R6, R7 |
| 1 | 10K 10k | R_Array_SIP7 | RN1 |
M68000-I-SBC design files
The KiCad project lives in the cartheur/M68000-I-SBC repository on GitHub; these links point at the commit this page was built from.
M68000-I-SBC: common questions
How big is the M68000-I-SBC PCB?
The M68000-I-SBC measures 127 × 90.8 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the M68000-I-SBC?
45 components, from 28 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the M68000-I-SBC design files?
From the cartheur/M68000-I-SBC repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the M68000-I-SBC design in my own project?
Yes, under the terms of its GPL-3.0 license, which cartheur chose for the repository.
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k