5 open source boards using the TL16C550
Real designs built with the TL16C550, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
M68000-I-SBC
cartheur
127 × 90.8 mm45 parts2LGPL-3.00Make 68000 Great Again
delphicchen
127 × 97.3 mm45 parts4LBSD-3-Clause0Morseboard-8088
ifilot
127 × 127 mm55 parts2LCERN-OHL-S-2.0068000sbc
ppsilv
127 × 90.8 mm45 parts2LGPL-3.0068k nano single board computer
demik
127 × 90.8 mm49 parts2LCERN-OHL-P-2.027
How designs wire the TL16C550
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the TL16C550 connects to, and the resistors, capacitors and other passives placed on it.
- The BAUDOUT pin is left unconnected on 5 of 5 designs.
- The CS2 pin has a crystal on 3 of 5 designs, most often 12 MHz.
- The D7 pin is left unconnected on 3 of 5 designs (a signal on 2).
- The CS1 pin is left unconnected on 3 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| D7pin 9 | Connected to: Not connected 60% · a signal 40% | — |
| RCLKpin 10 | Connected to: A connector 60% · not connected 40% |
|
| CS1pin 15 | Connected to: Not connected 60% · VCC 20% · a signal 20% | — |
| CS2pin 16 | Connected to: A connector 60%, TMP68HC000P-12 40% |
|
| BAUDOUTpin 17 | Connected to: Not connected 100% | — |
| XINpin 18 | Connected to: A connector 80%, 74HC139 60%, AS6C4008-55PCN 60% |
|
| XOUTpin 19 | Connected to: GND 60% · not connected 40% | — |
| GNDpin 22 | Connected to: GND 100% | — |
| A2pin 29 | Connected to: Not connected 60% · a signal 40% | — |
| RTSpin 36 | Connected to: A connector 60% |
|
| DTRpin 37 | Connected to: A connector 80% · not connected 20% |
|
| OUT1pin 38 | Connected to: A connector 80% · not connected 20% |
|
| MRpin 39 | Connected to: Signal 100% |
|
| CTSpin 40 | Connected to: VCC 60% · a signal 40% | — |
| VCCpin 44 | Connected to: VCC 100% | — |
24 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include 68k nano single board computer by demik, M68000-I-SBC by cartheur, Make 68000 Great Again by delphicchen and Morseboard-8088 by ifilot.
The TL16C550 in open source designs
The gallery holds 5 open source boards using the TL16C550 from 5 GitHub repositories; a typical one measures about 127 × 90.8 mm and carries around 45 components.
80% are two-layer designs, the rest use four layers or more, and 100% carry an open source license.
The most starred is 68k nano single board computer by demik.
Parts used alongside the TL16C550
What boards using the TL16C550 are built for
TL16C550: common questions
Where can I find a TL16C550 reference design?
Each of the 5 boards on this page is a real design using the TL16C550. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the TL16C550 BAUDOUT pin connected?
The BAUDOUT pin is left unconnected on 5 of 5 designs. Counted from the KiCad layouts of 5 open source designs using the TL16C550.
How is the TL16C550 CS2 pin connected?
The CS2 pin has a crystal on 3 of 5 designs, most often 12 MHz. Counted from the KiCad layouts of 5 open source designs using the TL16C550.
How is the TL16C550 D7 pin connected?
The D7 pin is left unconnected on 3 of 5 designs (a signal on 2). Counted from the KiCad layouts of 5 open source designs using the TL16C550.
What parts are used alongside the TL16C550?
The AS6C4008-55PCN, 28C256, 74HC139, 74HC14 and TMP68HC000P-12 appear in the most repositories here.
How big is a typical board using the TL16C550?
The median is 127 × 90.8 mm, and 80% are two-layer designs.
What is the most popular open source board using the TL16C550?
By GitHub stars, 68k nano single board computer by demik, with 27 stars.
Can I simulate one of these boards using the TL16C550 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.