WiflierB
About the WiflierB PCB
WiflierB is an open source ESP8266 PCB design by cnlohr, published on GitHub under the MIT license. It is a 2-layer board measuring 37.8 × 21.5 mm, with 61 components from 44 distinct parts.
Its main chip is the ESP8266EX, from the ESP8266 family. Other key parts include the MCP1824/3.3, BMP280, LSM9DS1, W25Q80DV and ATTINY441-QFN. By type, the board carries 23 connectors, 12 capacitors, 7 ICs, 6 resistors, 5 diodes and 4 transistors.
It belongs with the robotics & motion, sensors and iot & wireless designs in this gallery.
From the project
ESP8266-based Quadcopter Brain
WARNING: This project is still in its early stages! It doesn't fly yet!
WARNING: Everything surrounding a control loop in control.c for flight IS SUPER JANKEY AND TOTALLY NOT HOW IT SHOULD BE!
WARNING: When I operated the PWM at 3kHz, I had to modify my current board to add pullups on the I2C and short out the AVR's reset to VBat, otherwise it seemed to reboot randomly during flight.
Main components on the WiflierB
WiflierB bill of materials (BOM)
61 components, 44 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | MCP1824/3.3 | SOT23-5 | U1, U2 |
| 1 | BMP280 | BMP280 | U3 |
| 1 | LSM9DS1 | LGA-24B | U4 |
| 1 | ESP8266EX | QFN32 | U5 |
| 1 | W25Q80DV | SO8E | U6 |
| 1 | ATTINY441-QFN | QFN20 | U7 |
| 4 | 7A_20V | SOT23GDS | Q1, Q2, Q3, Q4 |
| 1 | 26MHz | XTAL4P | X1 |
| 1 | 10p | NETWORK0606 | CN1 |
| 1 | AVRISP6 | RIBBON6SMT | J1 |
| 1 | WS2812 | .1SMTPIN | P1 |
| 1 | M0 | SMT_1x2 | P2 |
| 1 | M1 | SMT_1x2 | P3 |
| 1 | M2 | SMT_1x2 | P4 |
| 1 | M3 | SMT_1x2 | P5 |
| 1 | ANT | .1SMTPIN | P6 |
| 2 | ~ | HOLE-1.9MM | P7, P8 |
| 1 | SDA | .1SMTPIN | P9 |
| 1 | SCL | .1SMTPIN | P10 |
| 1 | 3V | .1SMTPIN | P11 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | GND | .1SMTPIN | P12, P15 |
| 2 | LED | .1SMTPIN | P13, P14 |
| 1 | FLTBAT | .1SMTPIN | P16 |
| 1 | TOUT | .1SMTPIN | P17 |
| 1 | AVRA0 | .1SMTPIN | P18 |
| 1 | B+ | .1SMTPIN | P21 |
| 1 | B- | .1SMTPIN | P24 |
| 1 | ESP_UART | SMT_1x6 | P32 |
| 4 | 20V_500mA | SM0805 | D1, D2, D3, D4 |
| 1 | LED- | SM0805 | D5 |
| 1 | FB | SM0805 | FB1 |
| 2 | NP | SM0603 | L1, L2 |
| 1 | 5.6pF | SM0603 | C1 |
| 1 | 10nF | SM0603 | C2 |
| 2 | 1u | SM0603 | C3, C6 |
| 2 | .1u | SM0603 | C4, C5 |
| 1 | 1uF | SM0603 | C7 |
| 3 | 10uF | SM0603 | C8, C10, C11 |
| 1 | 10uF | SM0805 | C9 |
| 1 | 100uF | SM1206 | C12 |
| 2 | 12k | SM0603 | R1, R2 |
| 2 | NP | SM0603 | R4, R5 |
| 1 | 560 | NETWORK0606 | RN1 |
| 1 | 2.7k | NETWORK0606 | RN2 |
WiflierB design files
The KiCad project lives in the cnlohr/wiflier repository on GitHub; these links point at the commit this page was built from.
WiflierB: common questions
What microcontroller does the WiflierB use?
The WiflierB is built around the ESP8266EX, from the ESP8266 family.
How big is the WiflierB PCB?
The WiflierB measures 37.8 × 21.5 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the WiflierB?
61 components, from 44 distinct parts. The full bill of materials is listed on this page.
Where can I download the WiflierB design files?
From the cnlohr/wiflier repository on GitHub, which has the KiCad layout; the links under Design files point to each one.
Can I use the WiflierB design in my own project?
Yes, under the terms of its MIT license, which cnlohr chose for the repository.
Can I test firmware for the WiflierB without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP8266 firmware against it before you order a PCB.
More boards in wiflier
Similar boards
ESP8266ESP8266ControllerCircuit
stuartpittaway
75 × 30 mm20 parts2LCC-BY-NC-4.01.1k
ESP8266HASwitchPlate
aderusha
60 × 40 mm8 parts2LMIT738
ESP8266Goatgdo
Kaldek
32.9 × 53.3 mm23 parts2LMIT506
ESP8266RatGDO-OpenSource-Bare-ESP8266
55 × 82.7 mm20 parts2LMIT506
ESP8266RatGDO-OpenSource-D1Mini-ESP8266
47.8 × 63.3 mm12 parts2LMIT506
ESP8266Iaq board
nkitanov
70.1 × 43.2 mm17 parts2LNo license398