HardLabs

FYP Motor R3

conorcurley5·FYP_Files·KiCAD (PCB)/FYP_Motor_R2/R3_Del/FYP_Motor_R3.kicad_pcb

FYP Motor R3 PCB layout, top view — open source ESP32 board by conorcurley5
Simulate this board

About the FYP Motor R3 PCB

FYP Motor R3 is an open source ESP32 PCB design by conorcurley5, published on GitHub. It is a 4-layer board measuring 54 × 59.8 mm, with 35 components from 25 distinct parts.

Its main chip is the TMP112XXDRL, from the ESP32 family. Other key parts include the CP2102N-Axx-xQFN28, AMS1117CD-3.3 and ESP32-S3-WROOM-1. By type, the board carries 14 resistors, 6 capacitors, 5 diodes, 4 ICs, 3 connectors and 2 switches.

From the project

Due to the quantity of code involved in this project, all files are stored in this GitHub repository. There's almost 1GB of data here, so the portfolio would end up being significantly more than 100 pages.

Due to the quantity of code involved in this project, all files are stored in this GitHub repository. There's almost 1GB of data here, so the portfolio would end up being significantly more than 100 pages.

- CCS Application - KiCAD - SolidWorks - User Interface Application

This folder holds the code for the PlatformIO-based CCS software. The primary folder in here is "(Main)FYP Project - ESP", however older revisions of the software, and revisions for different platforms, are available also.

Main components on the FYP Motor R3

CP2102N-Axx-xQFN28TMP112XXDRLAMS1117CD-3.3ESP32-S3-WROOM-1

FYP Motor R3 bill of materials (BOM)

35 components, 25 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
CP2102N-Axx-xQFN28
U1
1
TMP112XXDRL
ESP32-S3-WROOM-1
U2
1
AMS1117CD-3.3
MAX485E
U3
1
ESP32-S3-WROOM-1
AMS1117CD-3.3
U4
1
UMH3N
Q1
1
USB_B_Micro
J1
1
Screw_Terminal_01x02
J2
1
SCREW_TERMINAL_01X02
Screw_Terminal_01x02
J3
2
SW_SPST
SW1, SW2
3
LESD5D5.0CT1G
D1, D2, D3
2
LED
D5, D6
1
1u
C1
1
10u
C2
1
10UF
10uF
C5
1
1UF
1uF
C6
1
0.01U
10uF
C7
1
22uF
C8
1
47.5k
R1
1
22.1k
R2
5
1k
R3, R12, R13, R14, R15
Show 5 more
QtyPartRefs
1
47.5K
1k
R4
1
22.1K
10k
R5
2
10k
R6, R8
2
20k
R9, R10
1
120
R11

FYP Motor R3 design files

The KiCad project lives in the conorcurley5/FYP_Files repository on GitHub; these links point at the commit this page was built from.

FYP Motor R3: common questions

What microcontroller does the FYP Motor R3 use?

The FYP Motor R3 is built around the TMP112XXDRL, from the ESP32 family.

How big is the FYP Motor R3 PCB?

The FYP Motor R3 measures 54 × 59.8 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the FYP Motor R3?

35 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the FYP Motor R3 design files?

From the conorcurley5/FYP_Files repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the FYP Motor R3 design in my own project?

The repository has no license, so all rights stay with conorcurley5. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the FYP Motor R3 without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in FYP_Files

Earlier revisions in the repo: FYP_Motor_R2, FYP_Motor

Similar boards