Eagleman vest-2
conradbuck·eagleman-vest-2·eagleman-vest-rev1/eagleman-vest-rev1.kicad_sch
About the Eagleman vest-2 PCB
Eagleman vest-2 is an open source ESP32 PCB design by conradbuck, published on GitHub. It is a board, with 102 components from 23 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the AP1117-33, TCA9548APWR and DRV2605LDGSR. By type, the board carries 35 resistors, 23 capacitors, 18 connectors, 14 ICs, 10 diodes and 2 switches.
Main components on the Eagleman vest-2
Eagleman vest-2 bill of materials (BOM)
102 components, 23 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP1117-33 | SOT-223-3_TabPin2 | U2 |
| 2 | TCA9548APWR | TSSOP-24_L7.8-W4.4-P0.65-LS6.4-BL | U3, U4 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U5 |
| 9 | DRV2605LDGSR | driver_footprint_maybe | U7, U8, U9, U10, U11, U12, U13, U15 +1 |
| 1 | DRV2605LDGSR | SOP50P490X110-10N | U14 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | PinHeader_1x08_P2.54mm_Vertical | J1 |
| 10 | SCREW_TERMINAL_01X02 Screw_Terminal_01x02 | PhoenixContact_MCV_1,5_2-G-5.08_1x02_P5.08mm_Vertical | J2, J3, J4, J5, J6, J7, J8, J9 +2 |
| 1 | CONN_01X02_PIN Conn_01x02_Pin | PinHeader_1x02_P2.54mm_Vertical | J14 |
| 2 | CONN_01X06_PIN Conn_01x06_Pin | PinHeader_1x06_P2.54mm_Vertical | J15, J19 |
| 1 | CONN_01X01_PIN Conn_01x01_Pin | PinHeader_1x01_P1.27mm_Vertical | J16 |
| 1 | CONN_01X08_PIN Conn_01x08_Pin | PinHeader_1x08_P1.27mm_Vertical | J17 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P1.27mm_Vertical | J18 |
| 1 | USB_C_PLUG_USB2.0 USB_C_Plug_USB2.0 | USB_C_Receptacle_G-Switch_GT-USB-7010ASV | P1 |
| 2 | SW_SPST | SW_SPST_FSMSM | SW1, SW2 |
| 10 | LED | C_0603_1608Metric | D31, D32, D33, D34, D35, D36, D37, D38 +2 |
| 1 | 22UF 22uF | C_0805_2012Metric | C1 |
| 1 | 10UF 10uF | C_0805_2012Metric | C2 |
| 10 | 1UF 1uF Samsung Electro-Mechanics | C_0603_1608Metric | C3, C4, C5, C6, C7, C8, C9, C10 +2 |
| 11 | 100NF 100nF Samsung Electro-Mechanics | C_0603_1608Metric | C13, C14, C24, C25, C27, C29, C30, C32 +3 |
| 2 | 5.1kΩ UNI-ROYAL(Uniroyal Elec) | C_0603_1608Metric | R1, R2 |
Show 3 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 22 | 4.7kΩ UNI-ROYAL(Uniroyal Elec) | C_0603_1608Metric | R3, R5, R17, R18, R19, R20, R21, R22 +14 |
| 1 | 10kΩ UNI-ROYAL(Uniroyal Elec) | C_0603_1608Metric | R7 |
| 10 | 220 | C_0603_1608Metric | R53, R54, R55, R56, R57, R58, R59, R60 +2 |
Eagleman vest-2 design files
The KiCad project lives in the conradbuck/eagleman-vest-2 repository on GitHub; these links point at the commit this page was built from.
Eagleman vest-2: common questions
What microcontroller does the Eagleman vest-2 use?
The Eagleman vest-2 is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How many components are on the Eagleman vest-2?
102 components, from 23 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Eagleman vest-2 design files?
From the conradbuck/eagleman-vest-2 repository on GitHub, which has the schematic and the BOM; the links under Design files point to each one.
Can I use the Eagleman vest-2 design in my own project?
The repository has no license, so all rights stay with conradbuck. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Eagleman vest-2 without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k