Retro handheld copperpilot

CopperPilot·retro-handheld-copperpilot

Retro handheld copperpilot PCB layout, top view — open source ESP32 board by CopperPilot

About the Retro handheld copperpilot PCB

Retro handheld copperpilot is an open source ESP32 PCB design by CopperPilot, published on GitHub under the CERN-OHL-P-2.0 license. It is a 4-layer board measuring 63 × 80 mm, with 74 components from 42 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the USBLC6-2SC6, MCP73831-2-OT and AP2112K-3.3. By type, the board carries 30 resistors, 17 switches, 15 capacitors, 4 ICs, 3 connectors and 3 diodes.

It belongs with the retro computing and power & battery designs in this gallery.

From the project

An ESP32-S3 game console on one 63 × 80 mm board. 2.4" TFT, 14 buttons, USB-C charging that keeps you playing, and a snap-fit case to print.

The CopperPilot Retro Handheld is an ultra-compact, single-board retro handheld console design built on a 4-layer FR-4 PCB (63.00 mm x 80.00 mm) with a parametric snap-fit enclosure. Built around an Espressif ESP32-S3 dual-core microcontroller, the hardware features a 2.4-inch 320x240 ILI9341 SPI color TFT display, 14 responsive gameplay and shoulder pushbuttons, integrated USB-C charging and native USB-OTG/JTAG programming, automatic load-sharing battery power management for uninterrupted gameplay while charging, and a removable 1000 mAh Li-Po cell.

Retro handheld copperpilot, from the project README
From the project README

Main components on the Retro handheld copperpilot

Retro handheld copperpilot bill of materials (BOM)

74 components, 42 distinct parts.

QtyPartRefs
1
USBLC6-2SC6
U1
1
MCP73831-2-OT
U2
1
AP2112K-3.3
U3
1
ESP32-S3-WROOM-1
U4
1
AO3401A
Q1
1
2N7002
Q2
1
USB_C_Receptacle_USB2.0_16P
J1
1
Conn_01x02
J2
1
SM10B-GHS-TB(LF)(SN)
ILI9341_TFT_2.4in
J3
1
SW_SPDT
SW1
1
RESET
SW2
1
BOOT
SW3
1
UP
SW4
1
DOWN
SW5
1
LEFT
SW6
1
RIGHT
SW7
1
X
SW8
1
Y
SW9
1
A
SW10
1
B
SW11
Show 22 more
QtyPartRefs
1
SELECT
SW12
1
START
SW13
1
L1
SW14
1
L2
SW15
1
R2
SW16
1
R1
SW17
1
LED_RED
D1
1
MBR0520
D2
1
LED_GREEN
D3
4
10uF
C1, C4, C7, C14
7
100nF
C2, C5, C6, C8, C10, C12, C15
1
4.7uF
C3
2
22uF
C9, C11
1
1uF
C13
2
22
R1, R2
2
5.1k
R3, R4
3
1k
R5, R10, R15
1
2.0k 1%
R6
2
100k
R7, R16
2
100k 1%
R8, R9
17
10k
R11, R12, R13, R17, R18, R19, R20, R21 +9
1
10
R14

Retro handheld copperpilot design files

The KiCad project lives in the CopperPilot/retro-handheld-copperpilot repository on GitHub; these links point at the commit this page was built from.

Retro handheld copperpilot: common questions

What microcontroller does the Retro handheld copperpilot use?

The Retro handheld copperpilot is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Retro handheld copperpilot PCB?

The Retro handheld copperpilot measures 63 × 80 mm, has 4 copper layers and is 1.6 mm thick.

How many components are on the Retro handheld copperpilot?

74 components, from 42 distinct parts. The full bill of materials is listed on this page.

Where can I download the Retro handheld copperpilot design files?

From the CopperPilot/retro-handheld-copperpilot repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Retro handheld copperpilot design in my own project?

Yes, under the terms of its CERN-OHL-P-2.0 license, which CopperPilot chose for the repository.

Can I test firmware for the Retro handheld copperpilot without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards