TouchSynth
cpldcpu·TouchSynth·hw/touchsynth/touchsynth.kicad_pcb
About the TouchSynth PCB
TouchSynth is an open source RISC-V PCB design by cpldcpu, published on GitHub under the MIT license. It is a 4-layer board measuring 100 × 100 mm, with 201 components from 44 distinct parts.
Its main chip is the CH32V003F4P6 / CH32V002F4P6, from the RISC-V family. Other key parts include the 78L05, TL072, LTV-817S, CD4051B and 74HC595. By type, the board carries 110 resistors, 48 capacitors, 18 diodes, 13 transistors and 12 ICs.
It belongs with the keyboards and audio designs in this gallery.
From the project
Analog Monophonic Synthesizer with a touch keyboard. Controller by CH32V00x
Everything here is generated from Python; edit the sources, not the .kicadsch` files.
Main components on the TouchSynth
TouchSynth bill of materials (BOM)
201 components, 44 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 78L05 | SOT-89-3 | U1 |
| 3 | TL072 | SOIC-8_3.9x4.9mm_P1.27mm | U2, U10, U11 |
| 1 | CH32V003F4P6 / CH32V002F4P6 | TSSOP-20_4.4x6.5mm_P0.65mm | U3 |
| 1 | LTV-817S | SMDIP-4_W9.53mm | U4 |
| 2 | CD4051B | SOIC-16_3.9x9.9mm_P1.27mm | U5, U6 |
| 3 | 74HC595 | SOIC-16_3.9x9.9mm_P1.27mm | U7, U8, U9 |
| 1 | LM324 | SOIC-14_3.9x8.7mm_P1.27mm | U12 |
| 4 | MMBT3904 | SOT-23 | Q1, Q3, Q10, Q12 |
| 1 | 2N7002 | SOT-23 | Q2 |
| 8 | BC847BS | SOT-363_SC-70-6 | Q4, Q5, Q6, Q7, Q8, Q9, Q11, Q13 |
| 1 | SS14 | D_SMA | D1 |
| 1 | 1N4148W | D_SOD-123 | D2 |
| 16 | red | LED_0603_1608Metric | D3, D4, D5, D6, D7, D8, D9, D10 +8 |
| 8 | 10µ | C_0603_1608Metric | C1, C5, C10, C11, C12, C13, C14, C46 |
| 17 | 100n | C_0603_1608Metric | C2, C4, C6, C15, C17, C18, C19, C20 +9 |
| 8 | 1µ | C_0603_1608Metric | C3, C7, C8, C9, C16, C35, C39, C44 |
| 8 | 33n | C_0603_1608Metric | C23, C27, C30, C31, C32, C33, C37, C42 |
| 3 | 22n | C_0603_1608Metric | C24, C38, C43 |
| 1 | 10n | C_0603_1608Metric | C25 |
| 2 | 1n | C_0603_1608Metric | C29, C47 |
Show 24 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7µ | C_0603_1608Metric | C40 |
| 15 | 1k | R_0603_1608Metric | R1, R9, R10, R11, R12, R48, R52, R57 +7 |
| 1 | 9.1k | R_0603_1608Metric | R2 |
| 1 | 10 | R_0603_1608Metric | R3 |
| 1 | 3.3k | R_0603_1608Metric | R4 |
| 2 | 1.5k | R_0603_1608Metric | R5, R60 |
| 17 | 10k | R_0603_1608Metric | R6, R7, R55, R63, R64, R66, R67, R73 +9 |
| 2 | 2.2k | R_0603_1608Metric | R8, R54 |
| 1 | 2.4k | R_0603_1608Metric | R13 |
| 1 | 220 | R_0603_1608Metric | R14 |
| 1 | 470 | R_0603_1608Metric | R15 |
| 29 | 4.7k | R_0603_1608Metric | R16, R17, R18, R19, R20, R21, R22, R23 +21 |
| 9 | 200k | R_0603_1608Metric | R32, R33, R35, R37, R39, R41, R43, R45 +1 |
| 10 | 100k | R_0603_1608Metric | R34, R36, R38, R40, R42, R44, R46, R65 +2 |
| 4 | 15k | R_0603_1608Metric | R51, R77, R93, R110 |
| 3 | 33k | R_0603_1608Metric | R53, R59, R97 |
| 1 | 300k | R_0603_1608Metric | R61 |
| 1 | 150k | R_0603_1608Metric | R69 |
| 4 | 470k | R_0603_1608Metric | R70, R71, R72, R96 |
| 1 | 6.2k | R_0603_1608Metric | R79 |
| 1 | 120k | R_0603_1608Metric | R80 |
| 3 | 22k | R_0603_1608Metric | R89, R105, R107 |
| 1 | 1M | R_0603_1608Metric | R100 |
| 1 | 2M | R_0603_1608Metric | R101 |
TouchSynth design files
The KiCad project lives in the cpldcpu/TouchSynth repository on GitHub; these links point at the commit this page was built from.
TouchSynth: common questions
What microcontroller does the TouchSynth use?
The TouchSynth is built around the CH32V003F4P6 / CH32V002F4P6, from the RISC-V family.
How big is the TouchSynth PCB?
The TouchSynth measures 100 × 100 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the TouchSynth?
201 components, from 44 distinct parts. The full bill of materials is listed on this page.
Where can I download the TouchSynth design files?
From the cpldcpu/TouchSynth repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the TouchSynth design in my own project?
Yes, under the terms of its MIT license, which cpldcpu chose for the repository.
Can I test firmware for the TouchSynth without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RISC-V firmware against it before you order a PCB.
Similar boards
RISC-V
Audio
byrantech
27.8 × 22.3 mm38 parts2LMIT4.3kRISC-V
Keybit
notaroomba
19.1 × 19.1 mm19 parts2LNo license438RISC-V
Workbench-1 Controller
Quchaosheng
160 × 130 mm106 parts8LApache-2.0212RISC-V
Froggyswadge
cnlohr
81.5 × 72.2 mm92 parts2LMIT105RISC-V
Keytartouch
cnlohr
152.5 × 117.5 mm69 parts2LMIT105RISC-V
Ch32v003f4u6 with wsled
cnlohr
40.6 × 44.5 mm26 parts2LMIT105