Matenode

cr1tbit·matenode

Matenode PCB layout, top view — open source ESP32 board by cr1tbit

About the Matenode PCB

Matenode is an open source ESP32 PCB design by cr1tbit, published on GitHub. It is a 2-layer board measuring 76 × 22 mm, with 78 components from 37 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. Other key parts include the SPX3819M5-L-3-3, BQ24073RGT, JLC_OLED and PAM8302AAD. By type, the board carries 23 capacitors, 23 resistors, 11 connectors, 5 ICs, 4 transistors and 4 jumpers.

It belongs with the power & battery designs in this gallery.

From the project

Power your blinking LEDs from a battery! Or just plain USB-C.

Main components on the Matenode

Matenode bill of materials (BOM)

78 components, 37 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
SPX3819M5-L-3-3
U1
1
BQ24073RGT
U2
1
JLC_OLED
U3
1
ESP32-C3-WROOM-02
U4
1
PAM8302AAD
U5
3
MMBT2222A
Q1, Q2, Q4
1
BSS84
Q3
1
USB_C_Receptacle
J1
2
VIN
J2, J6
1
QWIIC
J3
1
Vout
J4
1
Lichtenprog_conn
J5
1
Dout
J7
1
Gout
J8
1
SPK_OUT
J9
1
BAT_CONN
J10
1
2.54 header
J11
1
BYPASS_CHR
JP1
1
CONN_5V_ENA
JP2
1
3V3_FROM_USBC
JP3
Show 17 more
QtyPartRefs
1
PWR_FROM_USBC
JP4
1
10K
10k
RV1
1
RST
SW2
1
B2
SW3
1
BOOT/B1
SW4
4
LED_0603
D1, D2, D3, D4
14
10U
10u
C1, C3, C5, C6, C7, C9, C12, C13 +6
5
100n_0603
C2, C4, C8, C10, C11
4
100N
100n
C14, C15, C17, C18
2
5.1K
5.1k
R1, R2
8
10K
10k
R3, R6, R7, R9, R10, R16, R22, R23
5
100K
100k
R5, R8, R15, R25, R26
2
1.1K
1.1k
R12, R13
1
10K_0603
10k
R14
2
3k
R17, R18
2
470
R20, R21
1
22K
22k
R24

Matenode design files

The KiCad project lives in the cr1tbit/matenode repository on GitHub; these links point at the commit this page was built from.

Matenode: common questions

What microcontroller does the Matenode use?

The Matenode is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the Matenode PCB?

The Matenode measures 76 × 22 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Matenode?

78 components, from 37 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Matenode design files?

From the cr1tbit/matenode repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Matenode design in my own project?

The repository has no license, so all rights stay with cr1tbit. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Matenode without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards