5 open source boards using the BQ24073RGT
Real designs built with the BQ24073RGT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
CyberBadge
hspsh
112.5 × 41.5 mm567 parts2LNo license2ESP32
Smart-Meter
hupfer21
78 × 90 mm129 parts2LNo license1ESP32
Matenode
cr1tbit
76 × 22 mm78 parts2LNo license0Tama
rough-rat
35 × 50 mm68 parts4LNo license0PWB.003
MuffinKing-jpeg
61 × 31.5 mm48 parts2LCERN-OHL-P-2.00
How designs wire the BQ24073RGT
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the BQ24073RGT connects to, and the resistors, capacitors and other passives placed on it.
- The BAT pins have a capacitor to GND on 5 of 5 designs, most often 4.7 µF (then 10 µF).
- The ILIM pin has a resistor to GND on 5 of 5 designs, most often 1.1 kΩ (then 2 kΩ).
- The ISET pin has a resistor to GND on 5 of 5 designs, most often 2 kΩ (then 1.8 kΩ).
- The CE pin is tied to GND on 5 of 5 designs.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| TSpin 1 | Connected to: Signal 100% |
|
| BATpin 2, 3 | Connected to: A connector 20%, SM02B-GHS-TB(LF)(SN) 20% · VBAT 40% |
|
| CEpin 4 | Connected to: GND 100% | — |
| EN2pin 5 | Connected to: 4V 80% · a signal 20% | — |
| EN1pin 6 | Connected to: GND 100% | — |
| PGOODpin 7 | Connected to: Signal 100% |
|
| VSSpin 8, 17 | Connected to: GND 100% | — |
| CHGpin 9 | Connected to: Signal 100% |
|
| OUTpin 10, 11 | Connected to: 4V 80% · a signal 20% | — |
| ILIMpin 12 | Connected to: Signal 100% |
|
| INpin 13 | Connected to: VBUS 100% | — |
| TMRpin 14 | Connected to: Not connected 60% · a signal 40% |
|
| TDpin 15 | Connected to: GND 60% · a signal 40% |
|
| ISETpin 16 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include CyberBadge by hspsh, Smart-Meter by hupfer21, Matenode by cr1tbit and PWB.003 by MuffinKing-jpeg.
The BQ24073RGT in open source designs
The gallery holds 5 open source boards using the BQ24073RGT from 5 GitHub repositories; a typical one measures about 76 × 41.5 mm and carries around 78 components.
80% are two-layer designs, the rest use four layers or more, and 20% carry an open source license.
The most starred is CyberBadge by hspsh.
Parts used alongside the BQ24073RGT
Microcontrollers on boards using the BQ24073RGT
What boards using the BQ24073RGT are built for
BQ24073RGT: common questions
Where can I find a BQ24073RGT reference design?
Each of the 5 boards on this page is a real design using the BQ24073RGT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the BQ24073RGT BAT pin connected?
The BAT pins have a capacitor to GND on 5 of 5 designs, most often 4.7 µF (then 10 µF). Counted from the KiCad layouts of 5 open source designs using the BQ24073RGT.
What resistor goes on the BQ24073RGT ILIM pin?
The ILIM pin has a resistor to GND on 5 of 5 designs, most often 1.1 kΩ (then 2 kΩ). Counted from the KiCad layouts of 5 open source designs using the BQ24073RGT.
What resistor goes on the BQ24073RGT ISET pin?
The ISET pin has a resistor to GND on 5 of 5 designs, most often 2 kΩ (then 1.8 kΩ). Counted from the KiCad layouts of 5 open source designs using the BQ24073RGT.
Which microcontrollers do boards using the BQ24073RGT use?
Most are built on ESP32 (3).
How big is a typical board using the BQ24073RGT?
The median is 76 × 41.5 mm, and 80% are two-layer designs.
What is the most popular open source board using the BQ24073RGT?
By GitHub stars, CyberBadge by hspsh, with 2 stars.
Can I simulate one of these boards using the BQ24073RGT before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.