17 open source boards using the PAM8302AAD
Real designs built with the PAM8302AAD, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
ESP32
Sony scopeman
lucysrausch
53.5 × 101.8 mm135 parts2LNo license69Microchip SAM
Gb walkie talkie
idlehandsdev
65 × 67.5 mm66 parts2LNo license4RP2040/RP2350
Momentum panel
rjhsun
127.9 × 77.3 mm34 parts2LNo license1RP2040/RP2350
ARC-Hardware
IstratieStefan
89.5 × 121.6 mm145 parts4LMIT0RP2040/RP2350
OpenStylophone-RP2040
g210101021
151 × 95 mm117 parts2LCERN-OHL-P-2.00Raspberry Pi
Gbczero
hahhen
71.4 × 128 mm78 parts2LNo license0ESP32
Matenode
cr1tbit
76 × 22 mm78 parts2LNo license0RP2040/RP2350
Pcb project
EvilOtter222
110 × 60 mm62 parts2LNo license0RP2040/RP2350
Whistle
hridcode
21 × 53.4 mm61 parts2LNo license0Banjobox
AndrewJ-25
74.7 × 89.9 mm22 parts2LNo license0Audio
TheLordOmega
32 × 25.5 mm10 parts2LMIT0- schematic only · 141 partsESP32
MP3-Gotchi v2
Artisfera
141 partsAGPL-3.00 RP2040/RP2350
Momentum
rjhsun
30.5 × 67.3 mm25 parts2LNo license1RP2040/RP2350
Gb 1 0 pico.snapshot1
spaceape
165.1 × 76.2 mm59 parts2LNo license0PCM2900C
Envious-Data
22 × 40.6 mm28 parts2LGPL-3.00RP2040/RP2350
Gb 1 0 pico.snapshot2
spaceape
152.4 × 69.9 mm59 parts2LNo license0RP2040/RP2350
Gb 1 0 pico.snapshot3
spaceape
152.4 × 69.9 mm59 parts2LNo license0
How designs wire the PAM8302AAD
Read from the KiCad layouts of 13 open source designs, one per repository: what each pin of the PAM8302AAD connects to, and the resistors, capacitors and other passives placed on it.
- The VDD pin has a decoupling capacitor on 9 of 13 designs, most often 10 µF (then 1 µF).
- The IN+ pin has a series capacitor on 7 of 13 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| NCpin 2 | Connected to: Not connected 100% | — |
| IN+pin 3 | Connected to: Signal 100% |
|
| IN-pin 4 | Connected to: Signal 85% · GND 15% |
|
| VDDpin 6 | Connected to: 5V 85% · a signal 15% |
|
| GNDpin 7 | Connected to: GND 85% · a signal 15% | — |
3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Sony scopeman by lucysrausch, Gb walkie talkie by idlehandsdev, Momentum by rjhsun and Banjobox by AndrewJ-25.
The PAM8302AAD in open source designs
The gallery holds 17 open source boards using the PAM8302AAD from 14 GitHub repositories; a typical one measures about 75.3 × 69.8 mm and carries around 61 components.
94% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.
The most starred is Sony scopeman by lucysrausch.
Parts used alongside the PAM8302AAD
Microcontrollers on boards using the PAM8302AAD
What boards using the PAM8302AAD are built for
PAM8302AAD: common questions
Where can I find a PAM8302AAD reference design?
Each of the 17 boards on this page is a real design using the PAM8302AAD. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the PAM8302AAD VDD pin?
The VDD pin has a decoupling capacitor on 9 of 13 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the PAM8302AAD.
How is the PAM8302AAD IN+ pin connected?
The IN+ pin has a series capacitor on 7 of 13 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 13 open source designs using the PAM8302AAD.
What parts are used alongside the PAM8302AAD?
The PCM5102A, RP2040, AP2112K-3.3, DW01A and TP4056 appear in the most repositories here.
Which microcontrollers do boards using the PAM8302AAD use?
Most are built on RP2040/RP2350 (9), ESP32 (3), Raspberry Pi (1) and Microchip SAM (1).
How big is a typical board using the PAM8302AAD?
The median is 75.3 × 69.8 mm, and 94% are two-layer designs.
What is the most popular open source board using the PAM8302AAD?
By GitHub stars, Sony scopeman by lucysrausch, with 69 stars.
Can I simulate one of these boards using the PAM8302AAD before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.