Aquarius node hw
crgmakes·aquarius-node-hw·pcb/aquarius-node-hw.kicad_pcb
About the Aquarius node hw PCB
Aquarius node hw is an open source ESP32 PCB design by crgmakes, published on GitHub under the CC-BY-SA-4.0 license. It is a 4-layer board measuring 50 × 50 mm, with 81 components from 27 distinct parts.
Its main chip is the ESP32-S3-WROOM-1-N16R2, from the ESP32 family. Other key parts include the LM66200DRLR, USBLC6-2P6, MCP23017T-E/ML and AZ1084CD-3.3TRG1. By type, the board carries 28 diodes, 16 resistors, 15 capacitors, 13 connectors, 5 ICs and 2 switches.
From the project
Hardware for Aquarius Hub
All the source files for the generic node hardware. Fulfills both client and hub capabilities.
You will need KiCad to view and edit this design. Click here to download.
You will also need all the associated libraries and models to drive the design if you want to make changes or view the 3D rendering:
https://github.com/crgmakes/kicad-library.git
Kicad MUST be configured properly to use all the files in this repo. Once you have Kicad installed, under Preferences->Configure Paths..., make the following entries:
Main components on the Aquarius node hw
Aquarius node hw bill of materials (BOM)
81 components, 27 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ESP32-S3-WROOM-1-N16R2 | ESP32-S3-WROOM-1-N16R2 | U1 |
| 1 | LM66200DRLR | SOTFL50P160X60-8N | U2 |
| 1 | USBLC6-2P6 | SOT-666 | U3 |
| 1 | MCP23017T-E/ML | QFN-28-1EP_6x6mm_P0.65mm_EP4.25x4.25mm | U4 |
| 1 | AZ1084CD-3.3TRG1 AZ1084-3.3 | TO-252-2 | U7 |
| 1 | MMBT2222AT-7-F MMBT2222A | SOT-523 | Q1 |
| 1 | XF2M-1415-1A ~ | XF2M-1415-1A | J1 |
| 1 | USB4105-GF-A-060 USB_C_USB2.0_16P | GCT_USB4105-GF-A | J2 |
| 3 | BM03B-SRSS-TB ~ | JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J3, J11, J14 |
| 3 | BM06B-SRSS-TBT(LF)(SN) ~ | JST_SH_BM06B-SRSS-TB_1x06-1MP_P1.00mm_Vertical | J4, J5, J7 |
| 2 | BM08B-SRSS-TB(LF)(SN) ~ | JST_SH_BM08B-SRSS-TB_1x08-1MP_P1.00mm_Vertical | J6, J10 |
| 3 | BM04B-SRSS-TBT(LF)(SN) ~ | JST_SH_BM04B-SRSS-TB_1x04-1MP_P1.00mm_Vertical | J8, J9, J12 |
| 1 | FUET-5020 | FUET-5025 | LS1 |
| 2 | SKRPABE010 | SMD-4P-4.2x3.2mm | SW1, SW2 |
| 1 | WS2812C-2020-V1 WS2812B-2020 | LED_WS2812B-2020_PLCC4_2.0x2.0mm | D1 |
| 1 | MSK4010 D_Schottky | D_SOD-523 | D2 |
| 2 | PESD5V5C1BLYL PESD5V5C1BL | DFN1006-2 | D3, D20 |
| 22 | LESD8D3.3CAT5G PESD3V3S1BL | DFN1006-2 | D4, D5, D6, D7, D8, D9, D10, D11 +14 |
| 2 | XL-1608UOC-06 Orange | LED_0603_1608Metric | D23, D24 |
| 6 | CL10B104KO8NNNC 0.1uF | C_0603_1608Metric | C1, C4, C5, C6, C7, C9 |
Show 7 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | CL10A106MO8NQNC 10uF | C_0603_1608Metric | C2, C11, C12, C13 |
| 3 | CL10B105KO8NNNC 1uF | C_0603_1608Metric | C3, C10, C14 |
| 2 | CL21A476MPYNNWE 47uF | C_0805_2012Metric | C15, C16 |
| 3 | FRC0603J472 TS 4.7K | R_0603_1608Metric | R1, R2, R15 |
| 9 | FRC0603J103TS 10K | R_0603_1608Metric | R3, R4, R5, R6, R7, R8, R9, R13 +1 |
| 2 | FRC0603J512 TS 5.1K | R_0603_1608Metric | R10, R11 |
| 2 | FRC0603J102 TS 1K | R_0603_1608Metric | R12, R16 |
Aquarius node hw design files
The KiCad project lives in the crgmakes/aquarius-node-hw repository on GitHub; these links point at the commit this page was built from.
- Layoutpcb/aquarius-node-hw.kicad_pcb
- Schematicpcb/aquarius-node-hw.kicad_sch
Aquarius node hw: common questions
What microcontroller does the Aquarius node hw use?
The Aquarius node hw is built around the ESP32-S3-WROOM-1-N16R2, from the ESP32 family.
How big is the Aquarius node hw PCB?
The Aquarius node hw measures 50 × 50 mm, has 4 copper layers and is 1.6062 mm thick.
How many components are on the Aquarius node hw?
81 components, from 27 distinct parts. The full bill of materials is listed on this page.
Where can I download the Aquarius node hw design files?
From the crgmakes/aquarius-node-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Aquarius node hw design in my own project?
Yes, under the terms of its CC-BY-SA-4.0 license, which crgmakes chose for the repository.
Can I test firmware for the Aquarius node hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k