3.3 V LDO from 5 V (AP2112K-3.3)
Crossprobe-AI·kicad-design-blocks·crossprobe.kicad_blocks/ap2112k-3v3-ldo.kicad_block/ap2112k-3v3-ldo.kicad_pcb
About the 3.3 V LDO from 5 V (AP2112K-3.3) PCB
3.3 V LDO from 5 V (AP2112K-3.3) is an open source PCB design by Crossprobe-AI, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 9.4 × 1 mm, with 3 components from 2 distinct parts.
Other key parts include the AP2112K-3.3. By type, the board carries 2 capacitors and 1 IC.
It belongs with the power & battery designs in this gallery.
From the project
Reference circuits for KiCad in KiCad's design-block format: ESP32, RP2040, LDO, Li-ion charger, USB-C. Every value cites its datasheet page.
Reference circuits for KiCad, in KiCad's own design-block format (KiCad 9 and later): microcontroller modules with their reference circuit, power stages, USB-C input. Every value cites the datasheet page it comes from, and every block comes with a review checklist.
Made by Crossprobe, design review for KiCad. Browse the blocks with their checklists at https://dev.crossprobe.ai/blocks/.

Main components on the 3.3 V LDO from 5 V (AP2112K-3.3)
3.3 V LDO from 5 V (AP2112K-3.3) bill of materials (BOM)
3 components, 2 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | AP2112K-3.3 | SOT-23-5 | U1 |
| 2 | 1uF | C_0603_1608Metric | C1, C2 |
3.3 V LDO from 5 V (AP2112K-3.3) design files
The KiCad project lives in the Crossprobe-AI/kicad-design-blocks repository on GitHub; these links point at the commit this page was built from.
3.3 V LDO from 5 V (AP2112K-3.3): common questions
How big is the 3.3 V LDO from 5 V (AP2112K-3.3) PCB?
The 3.3 V LDO from 5 V (AP2112K-3.3) measures 9.4 × 1 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the 3.3 V LDO from 5 V (AP2112K-3.3)?
3 components, from 2 distinct parts. The full bill of materials is listed on this page.
Where can I download the 3.3 V LDO from 5 V (AP2112K-3.3) design files?
From the Crossprobe-AI/kicad-design-blocks repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the 3.3 V LDO from 5 V (AP2112K-3.3) design in my own project?
Yes, under the terms of its Apache-2.0 license, which Crossprobe-AI chose for the repository.
More boards in kicad-design-blocks
RP2040/RP2350
RP2040 minimal system
Crossprobe-AI
35 × 21 mm26 parts2LApache-2.00ESP32
ESP32-C3-WROOM-02 minimal system
Crossprobe-AI
47 × 34 mm18 parts2LApache-2.00ESP32
ESP32-S3-WROOM-1 minimal system
Crossprobe-AI
47 × 25 mm16 parts2LApache-2.00Li ion charger, 500 mA (MCP73831)
Crossprobe-AI
12.5 × 9 mm7 parts2LApache-2.00USB-C power input (5 V, USB 2.0)
Crossprobe-AI
4.5 × 6.2 mm3 parts2LApache-2.00
Similar boards
EinkPDA screen
TalismanDesign
95 × 54 mm27 parts2LApache-2.02.0kStack chan
stack-chan
50 × 50 mm33 parts2LApache-2.01.7kDisplay Carrier
AxxAxx
35.6 × 58.2 mm5 parts2LGPL-3.01.7kProgrammingAdapter
stuartpittaway
10.5 × 83 mm3 parts2LCC-BY-NC-4.01.1kTemperaturePCB PANEL
stuartpittaway
116 × 75.5 mm178 parts2LCC-BY-NC-4.01.1kModule 16S PassiveBalanceAddOn
stuartpittaway
61 × 74 mm86 parts2LCC-BY-NC-4.01.1k