Li ion charger, 500 mA (MCP73831)

Crossprobe-AI·kicad-design-blocks·crossprobe.kicad_blocks/mcp73831-li-ion-charger.kicad_block/mcp73831-li-ion-charger.kicad_pcb

Li ion charger, 500 mA (MCP73831) PCB layout, top view — open source board by Crossprobe-AI

About the Li ion charger, 500 mA (MCP73831) PCB

Li ion charger, 500 mA (MCP73831) is an open source PCB design by Crossprobe-AI, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 12.5 × 9 mm, with 7 components from 6 distinct parts.

Other key parts include the MCP73831-2. By type, the board carries 2 capacitors, 2 resistors, 1 IC, 1 jumper and 1 diode.

It belongs with the power & battery designs in this gallery.

From the project

Reference circuits for KiCad in KiCad's design-block format: ESP32, RP2040, LDO, Li-ion charger, USB-C. Every value cites its datasheet page.

Reference circuits for KiCad, in KiCad's own design-block format (KiCad 9 and later): microcontroller modules with their reference circuit, power stages, USB-C input. Every value cites the datasheet page it comes from, and every block comes with a review checklist.

Made by Crossprobe, design review for KiCad. Browse the blocks with their checklists at https://dev.crossprobe.ai/blocks/.

Li ion charger, 500 mA (MCP73831), from the project README
From the project README

Main components on the Li ion charger, 500 mA (MCP73831)

Li ion charger, 500 mA (MCP73831) bill of materials (BOM)

7 components, 6 distinct parts.

QtyPartRefs
1
MCP73831-2
U1
1
Battery
JP1
1
LED
D1
2
4.7uF
C1, C2
1
2k
R1
1
470
R2

Li ion charger, 500 mA (MCP73831) design files

The KiCad project lives in the Crossprobe-AI/kicad-design-blocks repository on GitHub; these links point at the commit this page was built from.

Li ion charger, 500 mA (MCP73831): common questions

How big is the Li ion charger, 500 mA (MCP73831) PCB?

The Li ion charger, 500 mA (MCP73831) measures 12.5 × 9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Li ion charger, 500 mA (MCP73831)?

7 components, from 6 distinct parts. The full bill of materials is listed on this page.

Where can I download the Li ion charger, 500 mA (MCP73831) design files?

From the Crossprobe-AI/kicad-design-blocks repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Li ion charger, 500 mA (MCP73831) design in my own project?

Yes, under the terms of its Apache-2.0 license, which Crossprobe-AI chose for the repository.

More boards in kicad-design-blocks

Similar boards