RP2040 minimal system

Crossprobe-AI·kicad-design-blocks·crossprobe.kicad_blocks/rp2040-minimal.kicad_block/rp2040-minimal.kicad_pcb

RP2040 minimal system PCB layout, top view — open source RP2040/RP2350 board by Crossprobe-AI

About the RP2040 minimal system PCB

RP2040 minimal system is an open source RP2040/RP2350 PCB design by Crossprobe-AI, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 35 × 21 mm, with 26 components from 13 distinct parts.

Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS. By type, the board carries 14 capacitors, 5 resistors, 3 connectors, 2 ICs, 1 crystal and 1 switch.

It belongs with the power & battery designs in this gallery.

From the project

Reference circuits for KiCad in KiCad's design-block format: ESP32, RP2040, LDO, Li-ion charger, USB-C. Every value cites its datasheet page.

Reference circuits for KiCad, in KiCad's own design-block format (KiCad 9 and later): microcontroller modules with their reference circuit, power stages, USB-C input. Every value cites the datasheet page it comes from, and every block comes with a review checklist.

Made by Crossprobe, design review for KiCad. Browse the blocks with their checklists at https://dev.crossprobe.ai/blocks/.

RP2040 minimal system, from the project README
From the project README

Main components on the RP2040 minimal system

RP2040 minimal system bill of materials (BOM)

26 components, 13 distinct parts.

QtyPartRefs
1
RP2040
U1
1
W25Q128JVS
U2
1
12MHz
X1
1
USB Micro-B
J1
1
USB_BOOT
J2
1
SWD
J3
1
RESET
SW1
10
100nF
C1, C2, C3, C4, C5, C6, C7, C8 +2
2
1uF
C11, C12
2
15pF
C13, C14
2
1k
R1, R4
2
27
R2, R3
1
10k
R5

RP2040 minimal system design files

The KiCad project lives in the Crossprobe-AI/kicad-design-blocks repository on GitHub; these links point at the commit this page was built from.

RP2040 minimal system: common questions

What microcontroller does the RP2040 minimal system use?

The RP2040 minimal system is built around the RP2040, from the RP2040/RP2350 family.

How big is the RP2040 minimal system PCB?

The RP2040 minimal system measures 35 × 21 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the RP2040 minimal system?

26 components, from 13 distinct parts. The full bill of materials is listed on this page.

Where can I download the RP2040 minimal system design files?

From the Crossprobe-AI/kicad-design-blocks repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the RP2040 minimal system design in my own project?

Yes, under the terms of its Apache-2.0 license, which Crossprobe-AI chose for the repository.

Can I test firmware for the RP2040 minimal system without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.

More boards in kicad-design-blocks

Similar boards