USB-C power input (5 V, USB 2.0)

Crossprobe-AI·kicad-design-blocks·crossprobe.kicad_blocks/usb-c-power-input.kicad_block/usb-c-power-input.kicad_pcb

USB-C power input (5 V, USB 2.0) PCB layout, top view — open source board by Crossprobe-AI

About the USB-C power input (5 V, USB 2.0) PCB

USB-C power input (5 V, USB 2.0) is an open source PCB design by Crossprobe-AI, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 4.5 × 6.2 mm, with 3 components from 2 distinct parts.

By type, the board carries 2 resistors and 1 connector.

It belongs with the power & battery designs in this gallery.

From the project

Reference circuits for KiCad in KiCad's design-block format: ESP32, RP2040, LDO, Li-ion charger, USB-C. Every value cites its datasheet page.

Reference circuits for KiCad, in KiCad's own design-block format (KiCad 9 and later): microcontroller modules with their reference circuit, power stages, USB-C input. Every value cites the datasheet page it comes from, and every block comes with a review checklist.

Made by Crossprobe, design review for KiCad. Browse the blocks with their checklists at https://dev.crossprobe.ai/blocks/.

USB-C power input (5 V, USB 2.0), from the project README
From the project README

USB-C power input (5 V, USB 2.0) bill of materials (BOM)

3 components, 2 distinct parts.

QtyPartRefs
1
USB-C receptacle
J1
2
5.1k
R1, R2

USB-C power input (5 V, USB 2.0) design files

The KiCad project lives in the Crossprobe-AI/kicad-design-blocks repository on GitHub; these links point at the commit this page was built from.

USB-C power input (5 V, USB 2.0): common questions

How big is the USB-C power input (5 V, USB 2.0) PCB?

The USB-C power input (5 V, USB 2.0) measures 4.5 × 6.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the USB-C power input (5 V, USB 2.0)?

3 components, from 2 distinct parts. The full bill of materials is listed on this page.

Where can I download the USB-C power input (5 V, USB 2.0) design files?

From the Crossprobe-AI/kicad-design-blocks repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the USB-C power input (5 V, USB 2.0) design in my own project?

Yes, under the terms of its Apache-2.0 license, which Crossprobe-AI chose for the repository.

More boards in kicad-design-blocks

Similar boards