ESP32-C3-WROOM-02 minimal system

Crossprobe-AI·kicad-design-blocks·crossprobe.kicad_blocks/esp32-c3-wroom-02-minimal.kicad_block/esp32-c3-wroom-02-minimal.kicad_pcb

ESP32-C3-WROOM-02 minimal system PCB layout, top view — open source ESP32 board by Crossprobe-AI

About the ESP32-C3-WROOM-02 minimal system PCB

ESP32-C3-WROOM-02 minimal system is an open source ESP32 PCB design by Crossprobe-AI, published on GitHub under the Apache-2.0 license. It is a 2-layer board measuring 47 × 34 mm, with 18 components from 12 distinct parts.

Its main chip is the ESP32-C3-WROOM-02, from the ESP32 family. By type, the board carries 6 capacitors, 6 resistors, 4 jumpers, 1 IC and 1 switch.

It belongs with the power & battery designs in this gallery.

From the project

Reference circuits for KiCad in KiCad's design-block format: ESP32, RP2040, LDO, Li-ion charger, USB-C. Every value cites its datasheet page.

Reference circuits for KiCad, in KiCad's own design-block format (KiCad 9 and later): microcontroller modules with their reference circuit, power stages, USB-C input. Every value cites the datasheet page it comes from, and every block comes with a review checklist.

Made by Crossprobe, design review for KiCad. Browse the blocks with their checklists at https://dev.crossprobe.ai/blocks/.

ESP32-C3-WROOM-02 minimal system, from the project README
From the project README

Main components on the ESP32-C3-WROOM-02 minimal system

ESP32-C3-WROOM-02 minimal system bill of materials (BOM)

18 components, 12 distinct parts.

QtyPartRefs
1
ESP32-C3-WROOM-02
U1
1
JTAG
JP1
1
Boot Option
JP2
1
USB
JP3
1
UART
JP4
1
RESET
SW1
1
10uF
C1
2
0.1uF
C2, C4
1
1uF
C3
2
TBD
C5, C6
3
10k
R1, R8, R9
3
0
R2, R4, R6

ESP32-C3-WROOM-02 minimal system design files

The KiCad project lives in the Crossprobe-AI/kicad-design-blocks repository on GitHub; these links point at the commit this page was built from.

ESP32-C3-WROOM-02 minimal system: common questions

What microcontroller does the ESP32-C3-WROOM-02 minimal system use?

The ESP32-C3-WROOM-02 minimal system is built around the ESP32-C3-WROOM-02, from the ESP32 family.

How big is the ESP32-C3-WROOM-02 minimal system PCB?

The ESP32-C3-WROOM-02 minimal system measures 47 × 34 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the ESP32-C3-WROOM-02 minimal system?

18 components, from 12 distinct parts. The full bill of materials is listed on this page.

Where can I download the ESP32-C3-WROOM-02 minimal system design files?

From the Crossprobe-AI/kicad-design-blocks repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the ESP32-C3-WROOM-02 minimal system design in my own project?

Yes, under the terms of its Apache-2.0 license, which Crossprobe-AI chose for the repository.

Can I test firmware for the ESP32-C3-WROOM-02 minimal system without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

More boards in kicad-design-blocks

Similar boards