Line follower

Crriminson·line-follower-pcb·PCB_Files/Unplugged.kicad_pcb

Line follower PCB layout, top view — open source ESP32 board by Crriminson

About the Line follower PCB

Line follower is an open source ESP32 PCB design by Crriminson, published on GitHub under the MIT license. It is a 2-layer board measuring 181.2 × 167.1 mm, with 15 components from 9 distinct parts.

Its main chip is the ESP32-DEVKIT-V1, from the ESP32 family. Other key parts include the ESP32-CAM and ROB-14450. By type, the board carries 4 connectors, 3 ICs, 1 test point and 1 diode.

It belongs with the robotics & motion, power & battery and displays & leds designs in this gallery.

From the project

KiCad schematic and compact PCB for a line follower robot's control board

High-efficiency KiCad schematic and PCB design for a Line Follower Car control system, built around the Round 2 challenge constraints.

The task is to design a compact and reliable central control PCB for a Line Follower Car within a 4-hour window, using a predefined component list and chassis boundary reference.

- Clean and manufacturable schematic - Compact PCB that fits mechanical constraints - Reliable power distribution and signal routing - Correct interfacing of all provided modules - Mechanical integration support through CAD

Main components on the Line follower

Line follower bill of materials (BOM)

15 components, 9 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ESP32-DEVKIT-V1
U1
1
ESP32-CAM
U2
1
ROB-14450
U3
4
Screw_Terminal_01x02
J1, J2, J3, J4
2
~
1, 2
2
~
IR_LEFT1, IR_RIGHT1
2
~
NEO-6M1, OLED-display1
1
~
TP1
1
D
D1

Line follower design files

The KiCad project lives in the Crriminson/line-follower-pcb repository on GitHub; these links point at the commit this page was built from.

Line follower: common questions

What microcontroller does the Line follower use?

The Line follower is built around the ESP32-DEVKIT-V1, from the ESP32 family.

How big is the Line follower PCB?

The Line follower measures 181.2 × 167.1 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Line follower?

15 components, from 9 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Line follower design files?

From the Crriminson/line-follower-pcb repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Line follower design in my own project?

Yes, under the terms of its MIT license, which Crriminson chose for the repository.

Can I test firmware for the Line follower without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards