DigitalTimer
CurcanRazvan·DigitalTimer
About the DigitalTimer PCB
DigitalTimer is an open source PCB design by CurcanRazvan, published on GitHub. It is a 2-layer board measuring 82 × 84 mm, with 34 components from 17 distinct parts.
Other key parts include the 74LS73, 74LS08, 4071, HDSP-7403 and 4511. By type, the board carries 14 resistors, 10 ICs, 4 capacitors, 2 switches and 1 connector.
It belongs with the displays & leds designs in this gallery.
From the project
KiCad project for a digital stopwatch. University practice project exploring binary counters and 7-segment displays.
This is the project I built for my 2nd-year university practice module. It is a digital timer designed in KiCad, capable of counting seconds (0-59) and displaying them on two 7-segment displays.
The circuit is designed with a modular approach: 1. Clock Signal: Generated by an NE555 timer configured as an astable oscillator. 2. Counting: Handled by two 74LS193 4-bit synchronous binary counters (U7 and U8). 3. Decoding & Display: The binary signal is converted for the 7-segment displays using CD4511 decoders.

Main components on the DigitalTimer
DigitalTimer bill of materials (BOM)
34 components, 17 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74LS73 | DIP-14_W7.62mm | U2 |
| 1 | 74LS08 | DIP-14_W7.62mm | U3 |
| 1 | 4071 | DIP-14_W7.62mm | U4 |
| 2 | HDSP-7403 | HDSP-7401 | U5, U11 |
| 2 | 4511 | DIP-16_W7.62mm | U6, U10 |
| 2 | 74LS193 | DIP-16_W7.62mm | U7, U8 |
| 1 | NE555D | DIP-8_W7.62mm | U9 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Altech_AK300-2_P5.00mm | J1 |
| 1 | 1k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | 1K |
| 1 | 10k | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | 10K |
| 1 | 300 | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | 300R |
| 1 | SW_Push | SW_PUSH_6mm | SW1 |
| 1 | SW_Start_Stop | SW_PUSH_6mm | SW2 |
| 2 | 100n | C_Disc_D3.0mm_W2.0mm_P2.50mm | C1, C2 |
| 1 | 10n | C_Rect_L7.0mm_W2.5mm_P5.00mm | C3 |
| 1 | 47u | C_Radial_D5.0mm_H11.0mm_P2.00mm | C4 |
| 14 | 300R | R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_Horizontal | R1, R2, R3, R4, R5, R6, R7, R8 +6 |
DigitalTimer design files
The KiCad project lives in the CurcanRazvan/DigitalTimer repository on GitHub; these links point at the commit this page was built from.
- Layoutpractica.kicad_pcb
- Schematicpractica.kicad_sch
DigitalTimer: common questions
How big is the DigitalTimer PCB?
The DigitalTimer measures 82 × 84 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the DigitalTimer?
34 components, from 17 distinct parts. The full bill of materials is listed on this page.
Where can I download the DigitalTimer design files?
From the CurcanRazvan/DigitalTimer repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the DigitalTimer design in my own project?
The repository has no license, so all rights stay with CurcanRazvan. Use it as a reference, and ask the author before reusing the design.
Similar boards
BM28B0.6-24DSBreakout
scottbez1
15.2 × 35.6 mm3 parts2LApache-2.022.2kLevelShifterBreakout
scottbez1
15.2 × 20.3 mm5 parts2LApache-2.022.2kView base
scottbez1
81.2 × 81.2 mm81 parts2LApache-2.022.2kView screen
scottbez1
35 × 35 mm12 parts2LApache-2.022.2kDisplay eval
byrantech
52.1 × 22.6 mm12 parts4LMIT4.3kChainlinkBase
scottbez1
98.4 × 190.5 mm119 parts2LApache-2.04.2k