12 open source boards using the 4511

Real designs built with the 4511, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

12 boardsClear filters|Most starred

How designs wire the 4511

Read from the KiCad layouts of 10 open source designs, one per repository: what each pin of the 4511 connects to, and the resistors, capacitors and other passives placed on it.

  • The QE pin has a series resistor on 10 of 10 designs, most often 300 Ω (then 330 Ω).
  • The QD pin has a series resistor on 10 of 10 designs, most often 300 Ω (then 330 Ω).
  • The QC pin has a series resistor on 10 of 10 designs, most often 300 Ω (then 330 Ω).
  • The QB pin has a series resistor on 10 of 10 designs, most often 300 Ω (then 330 Ω).
LTpin 3Connected to: 5V 60% · a signal 40%
BIpin 4Connected to: 5V 60% · a signal 40%
ELpin 5Connected to: GND 60% · a signal 40%
VSSpin 8Connected to: GND 100%
QEpin 9Connected to: Signal 100%
  • Series resistor on 100% · 300 Ω (2), 330 Ω (1), 560 Ω (1)
QDpin 10Connected to: Signal 100%
  • Series resistor on 100% · 300 Ω (2), 330 Ω (1), 560 Ω (1)
QCpin 11Connected to: Signal 100%
  • Series resistor on 100% · 300 Ω (2), 330 Ω (1), 560 Ω (1)
QBpin 12Connected to: Signal 100%
  • Series resistor on 100% · 300 Ω (2), 330 Ω (1), 560 Ω (1)
QApin 13Connected to: Signal 100%
  • Series resistor on 100% · 300 Ω (2), 330 Ω (1), 560 Ω (1)
QGpin 14Connected to: Signal 100%
  • Series resistor on 100% · 300 Ω (2), 330 Ω (1), 560 Ω (1)
QFpin 15Connected to: Signal 100%
  • Series resistor on 100% · 300 Ω (2), 330 Ω (1), 560 Ω (1)
VDDpin 16Connected to: 5V 100%

4 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Preperf 10x10 V1 by ApophisXIV, Pic-Projects by Agustin586, DigitalTimer by Bican-Valeriu-Cristian and Odometer by Churrosoft.

The 4511 in open source designs

The gallery holds 12 open source boards using the 4511 from 11 GitHub repositories; a typical one measures about 100 × 98.5 mm and carries around 76 components.

91% are two-layer designs, the rest use four layers or more, and 33% carry an open source license.

The most starred is Preperf 10x10 V1 by ApophisXIV.

Microcontrollers on boards using the 4511

What boards using the 4511 are built for

4511: common questions

Where can I find a 4511 reference design?

Each of the 12 boards on this page is a real design using the 4511. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What resistor goes on the 4511 QE pin?

The QE pin has a series resistor on 10 of 10 designs, most often 300 Ω (then 330 Ω). Counted from the KiCad layouts of 10 open source designs using the 4511.

What resistor goes on the 4511 QD pin?

The QD pin has a series resistor on 10 of 10 designs, most often 300 Ω (then 330 Ω). Counted from the KiCad layouts of 10 open source designs using the 4511.

What resistor goes on the 4511 QC pin?

The QC pin has a series resistor on 10 of 10 designs, most often 300 Ω (then 330 Ω). Counted from the KiCad layouts of 10 open source designs using the 4511.

What parts are used alongside the 4511?

The 74LS08, 74LS73, L7805, 4071 and 7400 appear in the most repositories here.

Which microcontrollers do boards using the 4511 use?

Most are built on ESP8266 (1), PIC (1) and STM32 (1).

How big is a typical board using the 4511?

The median is 100 × 98.5 mm, and 91% are two-layer designs.

What is the most popular open source board using the 4511?

By GitHub stars, Preperf 10x10 V1 by ApophisXIV, with 2 stars.

Can I simulate one of these boards using the 4511 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part