17 open source boards using the 4071

Real designs built with the 4071, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

17 boardsClear filters|Most starred

How designs wire the 4071

Read from the KiCad layouts of 15 open source designs, one per repository: what each pin of the 4071 connects to, and the resistors, capacitors and other passives placed on it.

VSSpin 7Connected to: GND 93%
VDDpin 14Connected to: VCC 93%

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include SNES-FeRAM-Cart by soniccd123, AZTEC Motherboard by awarsewa, 1802-Mini-Compact-Flash by dmadole and 1802-Mini-Super-Elf-Bus by dmadole.

The 4071 in open source designs

The gallery holds 17 open source boards using the 4071 from 16 GitHub repositories; a typical one measures about 100 × 97.9 mm and carries around 44 components.

94% are two-layer designs, the rest use four layers or more, and 29% carry an open source license.

The most starred is SNES-FeRAM-Cart by soniccd123.

Microcontrollers on boards using the 4071

4071: common questions

Where can I find a 4071 reference design?

Each of the 17 boards on this page is a real design using the 4071. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What parts are used alongside the 4071?

The 4001, 4011, 4049, 4013 and 4023 appear in the most repositories here.

Which microcontrollers do boards using the 4071 use?

Most are built on AVR/Arduino (1).

How big is a typical board using the 4071?

The median is 100 × 97.9 mm, and 94% are two-layer designs.

What is the most popular open source board using the 4071?

By GitHub stars, SNES-FeRAM-Cart by soniccd123, with 87 stars.

Can I simulate one of these boards using the 4071 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part