Dmxdude mini

cyfinfaza·dmxdude-mini

Dmxdude mini PCB layout, top view — open source ESP32 board by cyfinfaza

About the Dmxdude mini PCB

Dmxdude mini is an open source ESP32 PCB design by cyfinfaza, published on GitHub. It is a 2-layer board measuring 63.5 × 76.2 mm, with 85 components from 32 distinct parts.

Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the ST485E, STM32C011F4UX, LMR51610XDBVR, LM66100DCK and TLV74033PDBVR. By type, the board carries 25 resistors, 22 capacitors, 16 connectors, 9 ICs, 5 diodes and 3 switches.

It belongs with the iot & wireless and displays & leds designs in this gallery.

From the project

Hardware design for dmxdude DMX512/WS2812/Wi-Fi module

Main components on the Dmxdude mini

Dmxdude mini bill of materials (BOM)

85 components, 32 distinct parts — part numbers from the project's BOM.

QtyPartRefs
1
ST485E
U1
1
ESP32-S3-WROOM-1
U2
1
STM32C011F4UX
STM32C011F4Ux
U3
1
LMR51610XDBVR
U4
2
LM66100DCK
U5, U6
1
TLV74033PDBVR
U7
2
74AHCT1G125
U8, U9
1
CRYSTAL_GND24
Crystal_GND24
Y1
4
CONN_01X04
Conn_01x04
J1, J9, J11, J12
1
NC3MAAH
J2
1
NC3FAAH
J3
3
CONN_01X01
Conn_01x01
J4, J13, J15
1
CONN_01X10
Conn_01x10
J5
2
CONN_01X08
Conn_01x08
J6, J8
1
USB_C_RECEPTACLE_USB2.0_16P
USB_C_Receptacle_USB2.0_16P
J7
1
MSD-11-A
J10
2
SCREW_TERMINAL_01X03
Screw_Terminal_01x03
J14, J16
3
RKB2SJM250SMTR LFS
RKB2SJM250SMTR_LFS
S1, S2, S3
3
WS2812B
RGB1, RGB2, RGB3
4
LED
D1, D2, D3, D5
Show 12 more
QtyPartRefs
1
MM3ZXX
MM3Zxx
D4
1
SRR1050A-270Y
L1
12
100N
100n
C1, C7, C8, C10, C11, C14, C15, C16 +4
5
1u
C2, C9, C13, C19, C20
2
6.8P
6.8p
C5, C6
1
C_Polarized
C12
2
10U
10u
C17, C18
2
10K
10k
R1, R3
12
5.1K
5.1k
R4, R5, R6, R7, R8, R9, R10, R11 +4
8
470
R15, R16, R17, R18, R19, R20, R21, R26
2
100K
100k
R22, R24
1
19.1K
19.1k
R25

Dmxdude mini design files

The KiCad project lives in the cyfinfaza/dmxdude-mini repository on GitHub; these links point at the commit this page was built from.

Dmxdude mini: common questions

What microcontroller does the Dmxdude mini use?

The Dmxdude mini is built around the ESP32-S3-WROOM-1, from the ESP32 family.

How big is the Dmxdude mini PCB?

The Dmxdude mini measures 63.5 × 76.2 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Dmxdude mini?

85 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.

Where can I download the Dmxdude mini design files?

From the cyfinfaza/dmxdude-mini repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.

Can I use the Dmxdude mini design in my own project?

The repository has no license, so all rights stay with cyfinfaza. Use it as a reference, and ask the author before reusing the design.

Can I test firmware for the Dmxdude mini without the hardware?

Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.

Similar boards