6 open source boards using the LMR51610XDBVR
Real designs built with the LMR51610XDBVR, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
Esc w26
Electrium-Mobility
125 × 80 mm165 parts4LMIT4Mip servo controller
Mipot-Hi-Tech
100 × 90 mm202 parts4LCustom license3ESP32
Dmxdude mini
cyfinfaza
63.5 × 76.2 mm85 parts2LNo license0GT232 newmicro
GianluViv
50.7 × 13.8 mm30 parts4LNo license0MOBO DEV BreadBoard
robotique-udes
39.4 × 98.5 mm35 parts4LGPL-2.01ESP32
EStop
robotique-udes
141 × 73.5 mm32 parts2LGPL-2.01
How designs wire the LMR51610XDBVR
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the LMR51610XDBVR connects to, and the resistors, capacitors and other passives placed on it.
- The CB pin has a series capacitor on 5 of 5 designs, most often 100 nF.
- The FB pin has a resistor to GND on 5 of 5 designs, most often 22.1 kΩ (then 56.2 kΩ).
- The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF).
- The SW pin has a series capacitor on 5 of 5 designs, most often 100 nF.
| Pin | Connected to | Parts on the pin |
|---|---|---|
| CBpin 1 | Connected to: Signal 100% |
|
| GNDpin 2 | Connected to: GND 100% | — |
| FBpin 3 | Connected to: Signal 100% |
|
| ENpin 4 | Connected to: Signal 60% · 48V 40% |
|
| VINpin 5 | Connected to: 48V 60% · a signal 40% |
|
| SWpin 6 | Connected to: Signal 100% |
|
Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Esc w26 by Electrium-Mobility, Mip servo controller by Mipot-Hi-Tech, EStop by robotique-udes and Dmxdude mini by cyfinfaza.
The LMR51610XDBVR in open source designs
The gallery holds 6 open source boards using the LMR51610XDBVR from 5 GitHub repositories; a typical one measures about 81.8 × 78.1 mm and carries around 60 components.
67% use four copper layers or more, and 50% carry an open source license.
The most starred is Esc w26 by Electrium-Mobility.
Microcontrollers on boards using the LMR51610XDBVR
What boards using the LMR51610XDBVR are built for
LMR51610XDBVR: common questions
Where can I find a LMR51610XDBVR reference design?
Each of the 6 boards on this page is a real design using the LMR51610XDBVR. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
How is the LMR51610XDBVR CB pin connected?
The CB pin has a series capacitor on 5 of 5 designs, most often 100 nF. Counted from the KiCad layouts of 5 open source designs using the LMR51610XDBVR.
What resistor goes on the LMR51610XDBVR FB pin?
The FB pin has a resistor to GND on 5 of 5 designs, most often 22.1 kΩ (then 56.2 kΩ). Counted from the KiCad layouts of 5 open source designs using the LMR51610XDBVR.
What decoupling capacitors do designs use on the LMR51610XDBVR VIN pin?
The VIN pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 4.7 µF). Counted from the KiCad layouts of 5 open source designs using the LMR51610XDBVR.
Which microcontrollers do boards using the LMR51610XDBVR use?
Most are built on ESP32 (2).
How big is a typical board using the LMR51610XDBVR?
The median is 81.8 × 78.1 mm, and 33% are two-layer designs.
What is the most popular open source board using the LMR51610XDBVR?
By GitHub stars, Esc w26 by Electrium-Mobility, with 4 stars.
Can I simulate one of these boards using the LMR51610XDBVR before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.