SLKCAN
czmorris·SLKCAN·SLKCAN/KiCad/SLKCAN.kicad_pcb
About the SLKCAN PCB
SLKCAN is an open source ESP32 PCB design by czmorris, published on GitHub under the MIT license. It is a 4-layer board measuring 95.3 × 47 mm, with 42 components from 25 distinct parts.
Its main chip is the ESP32-WROOM-32, from the ESP32 family. Other key parts include the 3.3REG, 5VREG, MCP2515-xSO, MCP2551-I-SN and TXS0104EPWR. By type, the board carries 16 capacitors, 6 ICs, 6 resistors, 4 connectors, 4 inductors and 2 diodes.
From the project
SLKCAN (Slick CAN) PCB.
This board was created as project to connect to the CANBus on a City Slicker electric motorcycle (Though it may work with other canbus devices).
Goal: - Programmable via the Arduino IDE (Uses an ESP32). This allows anyone who uses it to customize it to their own needs. - Connect to the CANBus on the motorcycle. (Uses MCP2551 and MCP2515, Noise management was also required) - Provide a means to get 3.3 and 5v power from the 12v supply on the bikes data port. - Provide a means to get this information out via serial. Or to be reprogrammed via serial. Pin header provided. - Provide a header with…
Main components on the SLKCAN
SLKCAN bill of materials (BOM)
42 components, 25 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 3.3REG AMS1117-3.3 | SOT-223-3_TabPin2 | U1 |
| 1 | 5VREG LD1085V50 | TO-220-3_Horizontal_TabDown | U2 |
| 1 | ESP32-WROOM-32 | ESP32-WROOM-32 | U3 |
| 1 | MCP2515-xSO | SOIC-18W_7.5x11.6mm_P1.27mm | U4 |
| 1 | MCP2551-I-SN | SOIC-8_3.9x4.9mm_P1.27mm | U5 |
| 1 | TXS0104EPWR | SOP65P640X120-14N | U6 |
| 1 | 8Mhz | Crystal_SMD_5032-2Pin_5.0x3.2mm | Y1 |
| 1 | FTDI | PinHeader_1x06_P2.54mm_Vertical | J1 |
| 1 | POWER & CAN | PinHeader_1x04_P2.54mm_Horizontal | J2 |
| 1 | TF-15X15 | TF15X15 | J3 |
| 1 | AUX | PinHeader_2x06_P2.54mm_Vertical | J4 |
| 1 | 300mA | Fuse_0603_1608Metric | F1 |
| 1 | FTDI VDD DISCON | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | SW_Push | SW_SPST_CK_RS282G05A3 | SW1 |
| 1 | 1N5817 | D_SOD-123 | D1 |
| 1 | LED | LED_0805_2012Metric | D2 |
| 4 | 15uH | SUNLORD_SWPA5020S_CZM | L1, L2, L3, L4 |
| 4 | 10UF 10uF | C_0805_2012Metric | C1, C3, C4, C5 |
| 1 | 1UF 1uF | C_0805_2012Metric | C2 |
| 7 | 0.1uF | C_0805_2012Metric | C6, C9, C10, C11, C12, C13, C16 |
Show 5 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 22PF 22pF | C_0805_2012Metric | C7, C8 |
| 2 | 150PF 150pF | C_0805_2012Metric | C14, C15 |
| 3 | 10K 10k | R_0805_2012Metric | R1, R2, R3 |
| 2 | 60 | R_0805_2012Metric | R4, R5 |
| 1 | 1k | R_0805_2012Metric | R6 |
SLKCAN design files
The KiCad project lives in the czmorris/SLKCAN repository on GitHub; these links point at the commit this page was built from.
SLKCAN: common questions
What microcontroller does the SLKCAN use?
The SLKCAN is built around the ESP32-WROOM-32, from the ESP32 family.
How big is the SLKCAN PCB?
The SLKCAN measures 95.3 × 47 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the SLKCAN?
42 components, from 25 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the SLKCAN design files?
From the czmorris/SLKCAN repository on GitHub, which has the KiCad layout and the BOM; the links under Design files point to each one.
Can I use the SLKCAN design in my own project?
Yes, under the terms of its MIT license, which czmorris chose for the repository.
Can I test firmware for the SLKCAN without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k