Pico serial wb
D-Modem·hardware·hardware/kicad/pico-serial-wb.kicad_pcb
About the Pico serial wb PCB
Pico serial wb is an open source RP2040/RP2350 PCB design by D-Modem, published on GitHub. It is a 4-layer board measuring 20.6 × 78.4 mm, with 80 components from 53 distinct parts.
Its main chip is the RP2040, from the RP2040/RP2350 family. Other key parts include the W25Q128JVS, AP2112K-3.3, USBLC6-2SC6 and TLV320AIC3204. By type, the board carries 34 capacitors, 24 resistors, 6 diodes, 5 ICs, 2 connectors and 2 fuses.
From the project
Open source hardware modem designs. Supported by the D-Modem suite
netlist/buildnetlist.py` defines all parts and all connections on the board. The scripts make the netlist, the readable net list, the JLC parts list, the schematic and the PCB from it. Thus, change the script, not the outputs.
The script makes these boards: - The hood board (the default). It fits in a standard DB25 hood. - pico-serial W (--variant w, SPEC-W.md). It adds an RM2 Bluetooth module, and it is in a 3D-printed hood (enclosure/). Its files have a -w suffix. See pico-serial W. - pico-serial Line (--variant line, SPEC-L.md). It is a different device on the same RP2040 core: a USB-C…

Main components on the Pico serial wb
Pico serial wb bill of materials (BOM)
80 components, 53 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | RP2040 | QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | W25Q128JVS | SOIC-8_5.3x5.3mm_P1.27mm | U2 |
| 1 | AP2112K-3.3 | SOT-23-5 | U3 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U4 |
| 1 | TLV320AIC3204 | QFN-32-1EP_5x5mm_P0.5mm_EP3.45x3.45mm | U5 |
| 1 | 12MHZ 12MHz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | C165948 USB_C | USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | RJ11 | RJ11_Ckmtw_R-RJ11R06P-A800 | J2 |
| 1 | 0.5A | Fuse_1206_3216Metric | F1 |
| 1 | 1.25A | Fuse_Littelfuse_0461 | F2 |
| 1 | P3100SC | D_SMB | RV1 |
| 1 | C720477 BOOTSEL | SW_SPST_TS-1088-xR020 | SW1 |
| 1 | C720477 RESET | SW_SPST_TS-1088-xR020 | SW2 |
| 1 | PE-65848NL | Pulse_PE-65848 | T1 |
| 1 | SMF5.0A | D_SOD-123F | D1 |
| 1 | BZT52C43 ESDSLC5V0LB | D_0402_1005Metric | D2 |
| 2 | MMBD3004S BAV99 | SOT-23 | D3, D4 |
| 1 | C2286 LED_LINK | LED_0603_1608Metric | D5 |
| 1 | C2286 LED_DATA | LED_0603_1608Metric | D6 |
| 2 | C19330 600R@100MHz | L_0603_1608Metric | FB1, FB2 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 4.7NF 4.7nF | C_0402_1005Metric | C1 |
| 2 | 10UF 10uF | C_0603_1608Metric | C2, C3 |
| 14 | 100NF 100nF | C_0402_1005Metric | C4, C5, C6, C7, C8, C9, C10, C11 +6 |
| 2 | 1UF 1uF | C_0402_1005Metric | C12, C13 |
| 2 | 15PF 15pF | C_0402_1005Metric | C16, C17 |
| 1 | C2915768 10uF | C_0603_1608Metric | C21 |
| 1 | C2915768 100nF | C_0402_1005Metric | C22 |
| 1 | C28323 10uF | C_0603_1608Metric | C23 |
| 1 | 100NF 10uF | C_0603_1608Metric | C25 |
| 1 | 2.7NF 10uF | C_0603_1608Metric | C26 |
| 1 | 10NF 10nF C0G | C_0805_2012Metric | C27 |
| 1 | C106841 1uF | C_0402_1005Metric | C28 |
| 2 | C524545 1uF | C_0402_1005Metric | C29, C30 |
| 1 | 1uF | C_0402_1005Metric | C31 |
| 1 | 100nF | C_0402_1005Metric | C32 |
| 2 | 1uF 250V | C_1812_4532Metric | C33, C34 |
| 2 | 5.1K 5.1k | R_0402_1005Metric | R1, R2 |
| 1 | 1M | R_0402_1005Metric | R3 |
| 2 | 100K 100k | R_0402_1005Metric | R4, R5 |
| 2 | 27R | R_0402_1005Metric | R6, R7 |
| 2 | 1k | R_0402_1005Metric | R8, R9 |
| 1 | 10K 10k | R_0402_1005Metric | R10 |
| 2 | 4.7K 4.7k | R_0402_1005Metric | R11, R12 |
| 1 | 4.7K 10k | R_0402_1005Metric | R13 |
| 2 | 56.2R 60.4R | R_0603_1608Metric | R14, R15 |
| 1 | 1.07K 604R | R_0603_1608Metric | R16 |
| 1 | 604R | R_0603_1608Metric | R17 |
| 1 | 536R 1.21k | R_0603_1608Metric | R18 |
| 1 | 3.65K 1k | R_0402_1005Metric | R19 |
| 1 | 150R 1k | R_0402_1005Metric | R20 |
| 1 | 73.2R 1k | R_0402_1005Metric | R21 |
| 1 | 2.49K 1k | R_0402_1005Metric | R22 |
| 2 | 100K 1k | R_0402_1005Metric | R23, R24 |
Pico serial wb design files
The KiCad project lives in the D-Modem/hardware repository on GitHub; these links point at the commit this page was built from.
Pico serial wb: common questions
What microcontroller does the Pico serial wb use?
The Pico serial wb is built around the RP2040, from the RP2040/RP2350 family.
How big is the Pico serial wb PCB?
The Pico serial wb measures 20.6 × 78.4 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Pico serial wb?
80 components, from 53 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Pico serial wb design files?
From the D-Modem/hardware repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Pico serial wb design in my own project?
The repository has no license, so all rights stay with D-Modem. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Pico serial wb without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in hardware
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k