6 open source boards using the TLV320AIC3204

Real designs built with the TLV320AIC3204, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

6 boardsClear filters|Most starred

How designs wire the TLV320AIC3204

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the TLV320AIC3204 connects to, and the resistors, capacitors and other passives placed on it.

  • The IOVDD pin has a decoupling capacitor on 6 of 6 designs, most often 10 µF (then 1 µF).
  • The IN1_L pin has a series capacitor on 6 of 6 designs, most often 470 nF (then 2.2 µF).
  • The IN1_R pin has a series capacitor on 6 of 6 designs, most often 470 nF (then 2.2 µF).
  • The REF pin has a capacitor to GND on 6 of 6 designs, most often 10 µF (then 100 nF).
MCLKpin 1Connected to: Signal 100%
  • Series resistor on 83% · 10 kΩ (3), 10 Ω (2)
BCLKpin 2Connected to: The microcontroller 67%
  • Series resistor on 33% · 27 Ω (2)
WCLKpin 3Connected to: The microcontroller 67%
  • Series resistor on 33% · 27 Ω (2)
DINpin 4Connected to: The microcontroller 67%
  • Series resistor on 33% · 27 Ω (2)
DOUTpin 5Connected to: The microcontroller 67%
  • Series resistor on 33% · 27 Ω (2)
IOVDDpin 6Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 10 µF (6), 1 µF (4), 100 nF (4)
IOVSSpin 7Connected to: GND 100%
SCLKpin 8Connected to: Not connected 83% · GND 17%
SCL/SSpin 9Connected to: The microcontroller 67%
  • Pull-up to 3.3V on 83% · 3.3 kΩ (3), 10 kΩ (1), 4.7 kΩ (1)
SDApin 10Connected to: The microcontroller 67%
  • Pull-up to 3.3V on 83% · 3.3 kΩ (3), 10 kΩ (1), 4.7 kΩ (1)
MISOpin 11Connected to: Not connected 100%
SPI_SELECTpin 12Connected to: GND 100%
IN1_Lpin 13Connected to: Signal 100%
  • Series capacitor on 100% · 470 nF (4), 2.2 µF (1), 1 µF (1)
IN1_Rpin 14Connected to: Signal 100%
  • Series capacitor on 100% · 470 nF (4), 2.2 µF (1), 1 µF (1)
IN2_Lpin 15Connected to: Signal 100%
  • Series capacitor on 67% · 470 nF (4)
  • Capacitor to GND on 33% · 100 nF (2)
IN2_Rpin 16Connected to: Signal 100%
  • Series capacitor on 83% · 470 nF (4), 1 µF (1)
AVSSpin 17Connected to: GND 100%
REFpin 18Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 µF (6), 100 nF (1)
MICBIASpin 19Connected to: AP3722AT_mic 33% · not connected 33%
  • Series capacitor on 50% · 470 nF (3)
IN3_Lpin 20Connected to: Not connected 50% · a signal 50%
  • Capacitor to GND on 33% · 100 nF (2)
IN3_Rpin 21Connected to: Not connected 50% · a signal 50%
  • Series capacitor on 33% · 1 µF (1)
LOLpin 22Connected to: Not connected 67% · a signal 33%
LORpin 23Connected to: Not connected 67% · a signal 33%
AVDDpin 24Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 µF (6), 100 nF (2)
HPLpin 25Connected to: Signal 83% · not connected 17%
  • Series capacitor on 67% · 47 µF (4)
LDOIN/HPVDDpin 26Connected to: 3.3V 100%
  • Decoupling capacitor on 50% · 100 nF (3), 10 µF (3)
HPRpin 27Connected to: Signal 83% · not connected 17%
  • Series capacitor on 67% · 47 µF (4)
DVSSpin 28Connected to: GND 100%
DVDDpin 29Connected to: Signal 100%
  • Capacitor to GND on 100% · 10 µF (6), 100 nF (2)
LDO_SELECTpin 30Connected to: 3.3V 83% · a signal 17%
RESETpin 31Connected to: Signal 100%
  • Resistor to GND on 33% · 4.7 kΩ (1), 10 kΩ (1)
GPIOpin 32Connected to: Not connected 67% · a signal 33%
PAD_VSSpin 33Connected to: GND 83% · not connected 17%

Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Audcalc by jonbro, Lboard2 by electrodyssey, Rpi sa8x8hat by charlieh0tel and Pico serial wb by D-Modem.

The TLV320AIC3204 in open source designs

The gallery holds 6 open source boards using the TLV320AIC3204 from 6 GitHub repositories; a typical one measures about 65 × 100 mm and carries around 214 components.

100% use four copper layers or more, and 83% carry an open source license.

The most starred is Audcalc by jonbro.

Microcontrollers on boards using the TLV320AIC3204

What boards using the TLV320AIC3204 are built for

TLV320AIC3204: common questions

Where can I find a TLV320AIC3204 reference design?

Each of the 6 boards on this page is a real design using the TLV320AIC3204. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What decoupling capacitors do designs use on the TLV320AIC3204 IOVDD pin?

The IOVDD pin has a decoupling capacitor on 6 of 6 designs, most often 10 µF (then 1 µF). Counted from the KiCad layouts of 6 open source designs using the TLV320AIC3204.

How is the TLV320AIC3204 IN1_L pin connected?

The IN1_L pin has a series capacitor on 6 of 6 designs, most often 470 nF (then 2.2 µF). Counted from the KiCad layouts of 6 open source designs using the TLV320AIC3204.

How is the TLV320AIC3204 IN1_R pin connected?

The IN1_R pin has a series capacitor on 6 of 6 designs, most often 470 nF (then 2.2 µF). Counted from the KiCad layouts of 6 open source designs using the TLV320AIC3204.

What parts are used alongside the TLV320AIC3204?

The RP2040, HCPL-0631, LM4040DBZ-2.5, MCP73831T-2ATI/OT and ME6211C appear in the most repositories here.

Which microcontrollers do boards using the TLV320AIC3204 use?

Most are built on RP2040/RP2350 (4) and STM32 (1).

How big is a typical board using the TLV320AIC3204?

The median is 65 × 100 mm, and 0% are two-layer designs.

What is the most popular open source board using the TLV320AIC3204?

By GitHub stars, Audcalc by jonbro, with 59 stars.

Can I simulate one of these boards using the TLV320AIC3204 before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part