Round sensors fixed with universal board

DAlexis·caustic-lasertag-system·schematic/grouped-boards/round-sensors-universal/round_sensors_fixed_with_universal_board.kicad_pcb

Round sensors fixed with universal board layout, top view — open source board by DAlexis

Simulate this board

About the Round sensors fixed with universal board

Round sensors fixed with universal board is an open source PCB design by DAlexis, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 97.6 × 97.7 mm, with 56 components from 32 distinct parts.

Other key parts include the RGB-LED and TSOP4856. By type, the board carries 15 resistors, 12 capacitors, 11 connectors, 8 transistors, 4 ICs and 3 relays.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

Caustic project is a full-featured indoor and outdoor lasertag system

Caustic Lasertag System licensed under GPLv3. Third party code used in project may be licensed under other licences, see corresponding files and comments in the sources. Copyright 2016, see AUTHORS file.

You need to install cmake, arm-none-eabi-gcc compiler with arm-none-eabi-newlib and arm-none-eabi-binutils installed, and installation dirs should be in $PATH. Simply installation from your distro's repository usually enough. To flash the MCU with ST-link programmer you should install stlink utility. Then:

Main components on the Round sensors fixed with universal board

RGB-LED TSOP4856

Round sensors fixed with universal board bill of materials (BOM)

56 components, 32 distinct parts.

Qty	Part	Footprint	Refs
2	RGB-LED	RGB-led	U1, U2
2	TSOP4856	PIN_ARRAY_LARGE_PADS_2.54mm_3X1	U3, U4
1	MOSFET_P	SOT23GDS	Q1
6	MOS_N	SOT23GDS	Q2, Q3, Q5, Q6, Q7, Q8
1	MOSFET_N	SOT23GDS	Q4
1	SENSOR_CONNECTOR	PIN_ARRAY_5x2_SOCKET	P1
1	VibroEngine	PIN_ARRAY_LARGE_PADS_2.54mm_2X1	P2
1	Buttons	PIN_ARRAY_4x1	P3
1	VCC	PIN_ARRAY_2X1	P4
1	Speaker2	PIN_ARRAY_2X1	P5
1	UART1	PIN_ARRAY_2X1	P7
1	EXTENSION-CONNECTOR	PIN_ARRAY_5x2_SOCKET	P8
1	MOSFET	PIN_ARRAY_4x1	P9
1	MCU2	pin_array_10x2	P10
1	NRF24L01	pin_array_4x2	P12
1	IR_LED	PIN_ARRAY_2X1	P13
1	P***	1pin	1PIN
2	CONN_3	PIN_ARRAY_3X1	K1, K2
1	TSOP	PIN_ARRAY_3X1	K3
1	LED	LED-1206	D1

Show 12 more

Qty	Part	Footprint	Refs
1	FILTER	SM0805	FB1
1	4.7uF	SM0805	C1
1	0.47uF	SM0805	C2
1	0.015uF	SM0805	C3
3	0.1uF	SM0805	C4, C5, C6
3	CP1	c_tant_E	C7, C10, C12
1	470uF	c_tant_E	C8
2	1uF	SM0805	C9, C11
7	R	SM0805	R1, R2, R3, R4, R5, R6, R7
6	10k	SM0805	R8, R9, R12, R13, R14, R15
1	1.5k	SM0805	R10
1	2k	SM0805	R11

Round sensors fixed with universal board design files

The KiCad project lives in the DAlexis/caustic-lasertag-system repository on GitHub; these links point at the commit this page was built from.

Layoutschematic/grouped-boards/round-sensors-universal/round_sensors_fixed_with_universal_board.kicad_pcb

Round sensors fixed with universal board: common questions

How big is the Round sensors fixed with universal board?

The Round sensors fixed with universal board measures 97.6 × 97.7 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Round sensors fixed with universal board?

56 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the Round sensors fixed with universal board design files?

From the DAlexis/caustic-lasertag-system repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Round sensors fixed with universal board design in my own project?

Yes, under the terms of its GPL-3.0 license, which DAlexis chose for the repository.

More boards in caustic-lasertag-system

Similar boards