Fixed hs g431-tube sensors

DAlexis·caustic-lasertag-system·schematic/grouped-boards/hs-g431-tube-sensors/fixed-hs-g431-tube-sensors.kicad_pcb

Fixed hs g431-tube sensors PCB layout, top view — open source board by DAlexis

About the Fixed hs g431-tube sensors PCB

Fixed hs g431-tube sensors is an open source PCB design by DAlexis, published on GitHub under the GPL-3.0 license. It is a 2-layer board measuring 92.4 × 98.9 mm, with 52 components from 32 distinct parts.

Other key parts include the RGB-LED, TSOP4856, MCP73831, NCP551 and HC-05. By type, the board carries 15 capacitors, 13 resistors, 7 connectors, 5 ICs, 5 transistors and 4 diodes.

It belongs with the iot & wireless and sensors designs in this gallery.

From the project

Caustic project is a full-featured indoor and outdoor lasertag system

Caustic Lasertag System licensed under GPLv3. Third party code used in project may be licensed under other licences, see corresponding files and comments in the sources. Copyright 2016, see AUTHORS file.

You need to install cmake, arm-none-eabi-gcc compiler with arm-none-eabi-newlib and arm-none-eabi-binutils installed, and installation dirs should be in $PATH. Simply installation from your distro's repository usually enough. To flash the MCU with ST-link programmer you should install stlink utility. Then:

Main components on the Fixed hs g431-tube sensors

RGB-LED TSOP4856 MCP73831 NCP551 HC-05

Fixed hs g431-tube sensors bill of materials (BOM)

52 components, 32 distinct parts.

Qty	Part	Footprint	Refs
1	RGB-LED	LED_WS2812-PLCC6	U1
1	TSOP4856	Pin_Header_Straight_1x03	U2
1	MCP73831	SOT-23-5	U3
1	NCP551	SOT-23-5	U4
1	HC-05	ITEAD_HC-05	U5
1	IRLML6402	SOT-23	Q1
4	IRLML2502	SOT-23	Q2, Q3, Q4, Q5
1	8MHz	Crystal_HC49-U_Vertical	Y1
1	32768Hz	Crystal_Round_Horizontal_3mm	Y2
2	SENSOR_CONNECTOR	caustic-sensors-tube-connector	P1, P2
1	G B Vcc	Pin_Header_Straight_1x03	P3
1	NRF24L01	NRF25L01-universal	P4
1	USB_A	USB_B	P5
1	SENSOR_CONNECTOR	Pin_Header_Straight_1x10	P6
1	DEBUG_TX	Pin_Header_Straight_1x02	P7
1	Jumper_NO_Small	R_0402	JP1
1	Chrg	LED_0805	D1
1	DBG	LED_0805	D2
1	Link	LED_0805	D3
1	Mode	LED_0805	D4

Show 12 more

Qty	Part	Footprint	Refs
3	100uF	TantalC_SizeB_EIA-3528_Reflow	C1, C12, C13
5	0.1	C_0805	C2, C3, C4, C5, C9
4	20pF	C_0805	C6, C7, C8, C15
2	0.1uF	C_0805	C10, C11
1	4.7uF	C_0805	C14
1	200	R_0805	R1
2	150	R_0805	R2, R3
2	47k	R_0805	R4, R5
2	10k	R_0805	R6, R7
1	1.5k	R_0805	R8
4	470	R_0805	R9, R11, R12, R13
1	2k	R_0805	R10

Fixed hs g431-tube sensors design files

The KiCad project lives in the DAlexis/caustic-lasertag-system repository on GitHub; these links point at the commit this page was built from.

Layoutschematic/grouped-boards/hs-g431-tube-sensors/fixed-hs-g431-tube-sensors.kicad_pcb

Fixed hs g431-tube sensors: common questions

How big is the Fixed hs g431-tube sensors PCB?

The Fixed hs g431-tube sensors measures 92.4 × 98.9 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Fixed hs g431-tube sensors?

52 components, from 32 distinct parts. The full bill of materials is listed on this page.

Where can I download the Fixed hs g431-tube sensors design files?

From the DAlexis/caustic-lasertag-system repository on GitHub, which has the KiCad layout; the links under Design files point to each one.

Can I use the Fixed hs g431-tube sensors design in my own project?

Yes, under the terms of its GPL-3.0 license, which DAlexis chose for the repository.

More boards in caustic-lasertag-system

Similar boards