Trs80 backplane
davidellwood·trs80-m1-fpga-card·hardware/backplane/trs80_backplane.kicad_pcb
About the Trs80 backplane PCB
Trs80 backplane is an open source PCB design by davidellwood, published on GitHub under the MIT license. It is a 4-layer board measuring 196.6 × 118 mm, with 45 components from 30 distinct parts.
Other key parts include the 74HCT244, ATF16V8B-15PU ECB_BRIDGE and 74HC07. By type, the board carries 15 capacitors, 9 connectors, 9 jumpers, 6 resistors, 4 ICs and 1 fuse.
It belongs with the retro computing designs in this gallery.
From the project
TRS-80 Model I expansion system: ECB backplane, Tang Nano 20K sprite/Am9511 card, FreHD-compatible SD card, 512K banked memory - all through-hole
All-through-hole hardware, FPGA design, firmware and Z80 software for the TRS-80 Model I.
- Rev 2 (current): three ECB Eurocard daughter cards, with two ways to connect them to the Model I. The design is in docs/rev2-architecture.md. - The custom backplane: 5 slots, 4 layers, with an Expansion Interface pass-through. - The bridge card: plugs into a standard ECB backplane. The Model I connects by ribbon to a right-angle header, and there's no EI. - Rev 0.1: the original single card on a Tang Nano 9K. It remains here as a working reference; see docs/hardware-design.md.

Main components on the Trs80 backplane
Trs80 backplane bill of materials (BOM)
45 components, 30 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 2 | 74HCT244 | DIP-20_W7.62mm | U1, U2 |
| 1 | ATF16V8B-15PU ECB_BRIDGE | DIP-20_W7.62mm_Socket | U3 |
| 1 | 74HC07 | DIP-14_W7.62mm | U4 |
| 1 | M1 bus (card edge) | TRS80_M1_Edge_40 | J1 |
| 1 | To Expansion Interface | IDC-Header_2x20_P2.54mm_Vertical | J2 |
| 1 | 5V DC | BarrelJack_Horizontal | J3 |
| 1 | 5V terminal | TerminalBlock_Phoenix_MKDS-1,5-2-5.08_1x02_P5.08mm_Horizontal | J4 |
| 1 | ECB slot 1 | DIN41612_C_3x32_Female_Vertical_THT | J11 |
| 1 | ECB slot 2 | DIN41612_C_3x32_Female_Vertical_THT | J12 |
| 1 | ECB slot 3 | DIN41612_C_3x32_Female_Vertical_THT | J13 |
| 1 | ECB slot 4 | DIN41612_C_3x32_Female_Vertical_THT | J14 |
| 1 | ECB slot 5 | DIN41612_C_3x32_Female_Vertical_THT | J15 |
| 1 | MF-RHT300 (3A hold) | Fuse_Bourns_MF-RHT300 | F1 |
| 1 | CHAIN 1 | PinHeader_2x02_P2.54mm_Vertical | JP1 |
| 1 | CHAIN 2 | PinHeader_2x02_P2.54mm_Vertical | JP2 |
| 1 | CHAIN 3 | PinHeader_2x02_P2.54mm_Vertical | JP3 |
| 1 | CHAIN 4 | PinHeader_2x02_P2.54mm_Vertical | JP4 |
| 1 | CHAIN 5 | PinHeader_2x02_P2.54mm_Vertical | JP5 |
| 1 | POWER SW | PinHeader_1x02_P2.54mm_Vertical | JP6 |
| 1 | EDGE 5V | PinHeader_1x02_P2.54mm_Vertical | JP7 |
Show 10 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | EI RD SRC | PinHeader_1x03_P2.54mm_Vertical | JP8 |
| 1 | EI WR SRC | PinHeader_1x03_P2.54mm_Vertical | JP9 |
| 1 | PWR | LED_D5.0mm | D1 |
| 1 | 470uF 10V | CP_Radial_D10.0mm_P5.00mm | C1 |
| 9 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3, C4, C5, C6, C7, C8, C9 +1 |
| 5 | 10uF 10V | CP_Radial_D5.0mm_P2.00mm | C11, C12, C13, C14, C15 |
| 1 | 470 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 3 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4 |
| 1 | 4.7k | R_Array_SIP9 | RN1 |
| 1 | 10k | R_Array_SIP5 | RN2 |
Trs80 backplane design files
The KiCad project lives in the davidellwood/trs80-m1-fpga-card repository on GitHub; these links point at the commit this page was built from.
Trs80 backplane: common questions
How big is the Trs80 backplane PCB?
The Trs80 backplane measures 196.6 × 118 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Trs80 backplane?
45 components, from 30 distinct parts. The full bill of materials is listed on this page.
Where can I download the Trs80 backplane design files?
From the davidellwood/trs80-m1-fpga-card repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Trs80 backplane design in my own project?
Yes, under the terms of its MIT license, which davidellwood chose for the repository.
More boards in trs80-m1-fpga-card
Similar boards
Expansion Card Retrofit
FrameworkComputer
24 × 27.3 mm5 parts2LCC-BY-4.01.1kRgb to hdmi
hoglet67
77 × 97 mm67 parts2LGPL-3.01.0kBuffer
hoglet67
53.9 × 23.2 mm13 parts2LGPL-3.01.0kX1
hoglet67
121.9 × 81.3 mm51 parts2LGPL-3.01.0kAmiga External
hoglet67
21.9 × 76.7 mm6 parts2LGPL-3.01.0kVideoslotadapter
hoglet67
152 × 57.6 mm13 parts2LGPL-3.01.0k