Trs80 card sd
davidellwood·trs80-m1-fpga-card·hardware/card-sd/trs80_card_sd.kicad_pcb
About the Trs80 card sd PCB
Trs80 card sd is an open source RP2040/RP2350 PCB design by davidellwood, published on GitHub under the MIT license. It is a 2-layer board measuring 160 × 100 mm, with 39 components from 22 distinct parts.
Its main chip is the Raspberry Pi Pico, from the RP2040/RP2350 family. Other key parts include the 74HCT245 BUS<->XD, ATF16V8B-15PU ECB_SD_DECODE, CD74HC4050E and DS1307. By type, the board carries 9 resistors, 8 transistors, 7 capacitors, 6 ICs, 3 connectors and 3 diodes.
It belongs with the retro computing designs in this gallery.
From the project
TRS-80 Model I expansion system: ECB backplane, Tang Nano 20K sprite/Am9511 card, FreHD-compatible SD card, 512K banked memory - all through-hole
All-through-hole hardware, FPGA design, firmware and Z80 software for the TRS-80 Model I.
- Rev 2 (current): three ECB Eurocard daughter cards, with two ways to connect them to the Model I. The design is in docs/rev2-architecture.md. - The custom backplane: 5 slots, 4 layers, with an Expansion Interface pass-through. - The bridge card: plugs into a standard ECB backplane. The Model I connects by ribbon to a right-angle header, and there's no EI. - Rev 0.1: the original single card on a Tang Nano 9K. It remains here as a working reference; see docs/hardware-design.md.

Main components on the Trs80 card sd
Trs80 card sd bill of materials (BOM)
39 components, 22 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 74HCT245 BUS<->XD | DIP-20_W7.62mm | U1 |
| 1 | ATF16V8B-15PU ECB_SD_DECODE | DIP-20_W7.62mm_Socket | U2 |
| 2 | CD74HC4050E | DIP-16_W7.62mm | U3, U4 |
| 1 | Raspberry Pi Pico | RaspberryPi_Pico_Common_THT | U5 |
| 1 | DS1307 | DIP-8_W7.62mm | U6 |
| 8 | 2N7000 | TO-92_Inline_Wide | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8 |
| 1 | 32.768kHz | Crystal_C26-LF_D2.1mm_L6.5mm_Horizontal | Y1 |
| 1 | ECB bus | DIN41612_C_3x32_Male_Horizontal_THT | J1 |
| 1 | SD module | PinSocket_1x08_P2.54mm_Vertical | J2 |
| 1 | SPARE | PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | CR2032 | BatteryHolder_Keystone_103_1x20mm | BT1 |
| 1 | CARD EN | PinHeader_1x02_P2.54mm_Vertical | JP1 |
| 1 | 1N5819 | D_DO-41_SOD81_P10.16mm_Horizontal | D1 |
| 1 | ACT (green) | LED_D3.0mm | D2 |
| 1 | PWR (red) | LED_D3.0mm | D3 |
| 5 | 100nF | C_Disc_D5.0mm_W2.5mm_P5.00mm | C1, C2, C3, C4, C5 |
| 2 | 10uF 10V | CP_Radial_D5.0mm_P2.00mm | C6, C7 |
| 2 | 4.7k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2 |
| 1 | 330 | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 1k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
Show 2 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | 10k | R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5, R6, R7 |
| 2 | 4.7k | R_Array_SIP9 | RN1, RN2 |
Trs80 card sd design files
The KiCad project lives in the davidellwood/trs80-m1-fpga-card repository on GitHub; these links point at the commit this page was built from.
Trs80 card sd: common questions
What microcontroller does the Trs80 card sd use?
The Trs80 card sd is built around the Raspberry Pi Pico, from the RP2040/RP2350 family.
How big is the Trs80 card sd PCB?
The Trs80 card sd measures 160 × 100 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Trs80 card sd?
39 components, from 22 distinct parts. The full bill of materials is listed on this page.
Where can I download the Trs80 card sd design files?
From the davidellwood/trs80-m1-fpga-card repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Trs80 card sd design in my own project?
Yes, under the terms of its MIT license, which davidellwood chose for the repository.
Can I test firmware for the Trs80 card sd without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug RP2040/RP2350 firmware against it before you order a PCB.
More boards in trs80-m1-fpga-card
Similar boards
RP2040/RP2350
OSO-BOOK-C1
joeycastillo
85 × 115 mm29 parts2LCC-BY-SA-4.08.1kRP2040/RP2350
Corne cherry
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Corne chocolate
foostan
277.2 × 107.5 mm164 parts2LCC-BY-4.07.7kRP2040/RP2350
Jitx design
gusmanb
55.5 × 65 mm26 parts4LGPL-3.05.0kRP2040/RP2350
LogicAnalyzer
gusmanb
57 × 55.2 mm6 parts2LGPL-3.05.0kRP2040/RP2350
Main
google
98 × 71 mm102 parts2LApache-2.02.9k