Trs80 card xmem

davidellwood·trs80-m1-fpga-card·hardware/card-xmem/trs80_card_xmem.kicad_pcb

Trs80 card xmem PCB layout, top view — open source board by davidellwood

About the Trs80 card xmem PCB

Trs80 card xmem is an open source PCB design by davidellwood, published on GitHub under the MIT license. It is a 2-layer board measuring 160 × 100 mm, with 24 components from 16 distinct parts.

Other key parts include the AS6C4008-55PCN, 74HCT245 BUS<->RAM, ATF16V8B-15PU ECB_XMEM_IO, ATF16V8B-15PU ECB_XMEM_MEM and 74HCT273 LO PAGE. By type, the board carries 9 capacitors, 8 ICs, 3 resistors, 2 jumpers, 1 connector and 1 diode.

It belongs with the retro computing designs in this gallery.

From the project

TRS-80 Model I expansion system: ECB backplane, Tang Nano 20K sprite/Am9511 card, FreHD-compatible SD card, 512K banked memory - all through-hole

All-through-hole hardware, FPGA design, firmware and Z80 software for the TRS-80 Model I.

- Rev 2 (current): three ECB Eurocard daughter cards, with two ways to connect them to the Model I. The design is in docs/rev2-architecture.md. - The custom backplane: 5 slots, 4 layers, with an Expansion Interface pass-through. - The bridge card: plugs into a standard ECB backplane. The Model I connects by ribbon to a right-angle header, and there's no EI. - Rev 0.1: the original single card on a Tang Nano 9K. It remains here as a working reference; see docs/hardware-design.md.

Trs80 card xmem, from the project README
From the project README

Main components on the Trs80 card xmem

AS6C4008-55PCN74HCT245 BUS<->RAMATF16V8B-15PU ECB_XMEM_IOATF16V8B-15PU ECB_XMEM_MEM74HCT273 LO PAGE74HCT273 HI PAGE74HCT15774HCT244 READBACK

Trs80 card xmem bill of materials (BOM)

24 components, 16 distinct parts.

QtyPartRefs
1
AS6C4008-55PCN
U1
1
74HCT245 BUS<->RAM
U2
1
ATF16V8B-15PU ECB_XMEM_IO
U3
1
ATF16V8B-15PU ECB_XMEM_MEM
U4
1
74HCT273 LO PAGE
U5
1
74HCT273 HI PAGE
U6
1
74HCT157
U7
1
74HCT244 READBACK
U8
1
ECB bus
J1
1
SUPERMEM
JP1
1
ENABLE
JP2
1
PWR (red)
D1
8
100nF
C1, C2, C3, C4, C5, C6, C7, C8
1
10uF 10V
C9
2
10k
R1, R2
1
1k
R3

Trs80 card xmem design files

The KiCad project lives in the davidellwood/trs80-m1-fpga-card repository on GitHub; these links point at the commit this page was built from.

Trs80 card xmem: common questions

How big is the Trs80 card xmem PCB?

The Trs80 card xmem measures 160 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Trs80 card xmem?

24 components, from 16 distinct parts. The full bill of materials is listed on this page.

Where can I download the Trs80 card xmem design files?

From the davidellwood/trs80-m1-fpga-card repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Trs80 card xmem design in my own project?

Yes, under the terms of its MIT license, which davidellwood chose for the repository.

More boards in trs80-m1-fpga-card

Similar boards