Trs80 card bridge

davidellwood·trs80-m1-fpga-card·hardware/card-bridge/trs80_card_bridge.kicad_pcb

Trs80 card bridge PCB layout, top view — open source board by davidellwood

About the Trs80 card bridge PCB

Trs80 card bridge is an open source PCB design by davidellwood, published on GitHub under the MIT license. It is a 2-layer board measuring 160 × 100 mm, with 33 components from 18 distinct parts.

Other key parts include the 74HCT244, ATF16V8B-15PU ECB_BRIDGE_CARD, 74HC07, 74LS244 STROBE RX and ATF22V10C-15PU ECB_BRIDGE_CLAIM. By type, the board carries 14 resistors, 8 capacitors, 7 ICs, 2 connectors, 1 jumper and 1 diode.

It belongs with the retro computing designs in this gallery.

From the project

TRS-80 Model I expansion system: ECB backplane, Tang Nano 20K sprite/Am9511 card, FreHD-compatible SD card, 512K banked memory - all through-hole

All-through-hole hardware, FPGA design, firmware and Z80 software for the TRS-80 Model I.

- Rev 2 (current): three ECB Eurocard daughter cards, with two ways to connect them to the Model I. The design is in docs/rev2-architecture.md. - The custom backplane: 5 slots, 4 layers, with an Expansion Interface pass-through. - The bridge card: plugs into a standard ECB backplane. The Model I connects by ribbon to a right-angle header, and there's no EI. - Rev 0.1: the original single card on a Tang Nano 9K. It remains here as a working reference; see docs/hardware-design.md.

Trs80 card bridge, from the project README
From the project README

Main components on the Trs80 card bridge

74HCT244ATF16V8B-15PU ECB_BRIDGE_CARD74HC0774LS244 STROBE RXATF22V10C-15PU ECB_BRIDGE_CLAIM74HCT245 DATA BUFFER

Trs80 card bridge bill of materials (BOM)

33 components, 18 distinct parts.

QtyPartRefs
2
74HCT244
U1, U2
1
ATF16V8B-15PU ECB_BRIDGE_CARD
U3
1
74HC07
U4
1
74LS244 STROBE RX
U5
1
ATF22V10C-15PU ECB_BRIDGE_CLAIM
U6
1
74HCT245 DATA BUFFER
U7
1
ECB bus
J1
1
Model I bus
J2
1
EDGE 5V
JP1
1
PWR (red)
D1
1
47uF 10V
C1
7
100nF
C2, C3, C4, C5, C6, C7, C8
2
4.7k
R1, R2
1
1k
R3
1
10k
R4
8
33
R5, R6, R7, R8, R9, R10, R11, R12
1
4.7k
RN1
1
10k
RN2

Trs80 card bridge design files

The KiCad project lives in the davidellwood/trs80-m1-fpga-card repository on GitHub; these links point at the commit this page was built from.

Trs80 card bridge: common questions

How big is the Trs80 card bridge PCB?

The Trs80 card bridge measures 160 × 100 mm, has 2 copper layers and is 1.6 mm thick.

How many components are on the Trs80 card bridge?

33 components, from 18 distinct parts. The full bill of materials is listed on this page.

Where can I download the Trs80 card bridge design files?

From the davidellwood/trs80-m1-fpga-card repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.

Can I use the Trs80 card bridge design in my own project?

Yes, under the terms of its MIT license, which davidellwood chose for the repository.

More boards in trs80-m1-fpga-card

Similar boards