Budgetcan g4-hw
dbstephan·budgetcan-g4-hw
About the Budgetcan g4-hw PCB
Budgetcan g4-hw is an open source STM32 PCB design by dbstephan, published on GitHub under the MIT license. It is a 4-layer board measuring 76.2 × 38.1 mm, with 92 components from 53 distinct parts.
Its main chip is the STM32G473CBTx, from the STM32 family. Other key parts include the SN74LVC1G66DBVR, AP22804AW5, TJA1051T-3, USBLC6-2SC6 and TPS5430DDA. By type, the board carries 30 resistors, 28 capacitors, 13 ICs, 10 diodes, 3 connectors and 2 transistors.
From the project
Hardware for the STM32G4 based budgetcan
Hardware files for a simple CAN and LIN device built around an STM32 G4 MCU
The BudgetCAN G4 Hardware is designed to implement the full CAN potential of the STM32G4 MCU. The hardware has been designed with the following features: USB-C connector for robust connectivity to a host machine 3 CANFD channels each with SW selectable termination resistors 1 LIN channel with SW selectable master pull-up 12V power input provides power for LIN and a 3A 5V regulator Debug header pinout for STLINK v3 Mini 14-pin connector - the VCP pins are routed to a UART for debugging Onboard 8Mhz crystal provides…

Main components on the Budgetcan g4-hw
Budgetcan g4-hw bill of materials (BOM)
92 components, 53 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 3 | SN74LVC1G66DBVR | SOT-23-5 | IC1, IC2, IC4 |
| 1 | AP22804AW5 | SOT-23-5 | U1 |
| 3 | TJA1051T-3 | SOIC-8_3.9x4.9mm_P1.27mm | U2, U4, U5 |
| 1 | USBLC6-2SC6 | SOT-23-6 | U3 |
| 1 | STM32G473CBTx | LQFP-48_7x7mm_P0.5mm | U6 |
| 1 | TPS5430DDA | TI_SO-PowerPAD-8_ThermalVias | U8 |
| 1 | TLV75901PDRVR | WSON-6_L2.0-W2.0-P0.65-TL-EP | U9 |
| 1 | TJA1021T | SOIC-8_3.9x4.9mm_P1.27mm | U12 |
| 1 | TPS2116DRLR | SOT-583-8_L2.1-W1.6-P0.50-LS1.6-BL | U14 |
| 1 | 2N7002 | SOT-23 | Q1 |
| 1 | MMBT3904 | SOT-23 | Q2 |
| 1 | 8Mhz | Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | USB4085-GF-A USB_C_Receptacle_USB2.0 | USB_C_Receptacle_Palconn_UTC16-G | J1 |
| 1 | FTSH-107-01-L-D-K 20021511-00014T4LF | PinHeader_2x07_P1.27mm_Vertical | J3 |
| 1 | 348260124 | CONN-TH_348260124 | J5 |
| 1 | PESD1LIN,135 PESD1LIN | D_SOD-323 | CR1 |
| 1 | 0ZCK0035FF2G Polyfuse | Fuse_0805_2012Metric | F1 |
| 1 | 0ZCG0200AF2B Polyfuse | F1812 | F3 |
| 1 | TS-1088-AR02016 | SW-SMD_L3.9-W3.0-P4.45 | SW1 |
| 3 | PESD2CAN,215 PESD2CAN_215 Nexperia USA Inc. | SOT-23 | D1, D5, D10 |
Show 33 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 1N4448WX-TP | D_SOD-323 | D2 |
| 2 | LED_RED | LED_0805_2012Metric | D3, D4 |
| 1 | LED_BLUE | LED_0805_2012Metric | D6 |
| 1 | LED_GRN | LED_0805_2012Metric | D7 |
| 1 | S1G S1G 400V 1A | D_SMA | D13 |
| 1 | B340A | D_SMA | D14 |
| 1 | 15uH | L_Bourns_SRP7028A_7.3x6.6mm | L3 |
| 11 | CC0603KRX7R8BB104 0.1uF | C_0402_1005Metric | C1, C3, C4, C5, C6, C8, C14, C16 +3 |
| 1 | CC0603JRNPO9BN221 220pF | C_0402_1005Metric | C2 |
| 2 | CC0603KRX7R8BB104 0.1uF | C_0603_1608Metric | C7, C10 |
| 1 | 4.7uF | C_0603_1608Metric | C9 |
| 2 | 1uF | C_0603_1608Metric | C23, C26 |
| 1 | CL31B106KQHNFNE 10uF | C_1206_3216Metric | C25 |
| 1 | 0.01uF | C_0603_1608Metric | C27 |
| 6 | 0.1uF | C_0402_1005Metric | C28, C30, C32, C34, C35, C36 |
| 1 | 220uF | CP_Elec_6.3x5.4 | C29 |
| 2 | 18pF | C_0402_1005Metric | C31, C33 |
| 1 | RC0603FR-07100KL 100k | R_0603_1608Metric | R1 |
| 1 | RC0603JR-074K7L 4.7k | R_0402_1005Metric | R2 |
| 5 | RC0603FR-071KL 1k | R_0402_1005Metric | R3, R9, R20, R22, R26 |
| 1 | 4.7k | R_0402_1005Metric | R4 |
| 4 | RC0603FR-071KL 820R | R_0603_1608Metric | R5, R6, R7, R23 |
| 5 | RC0603FR-0710KL 10k | R_0402_1005Metric | R8, R10, R11, R21, R27 |
| 3 | RC0603FR-07120RL 120R | R_0402_1005Metric | R12, R13, R28 |
| 1 | RC0603FR-0710KL 6.8k | R_0402_1005Metric | R14 |
| 1 | 0R | R_0402_1005Metric | R15 |
| 1 | RC0603FR-0733K2L 33k | R_0402_1005Metric | R16 |
| 1 | RC0603FR-0710KL 100k | R_0603_1608Metric | R18 |
| 1 | RC0603FR-0710KL 20k | R_0603_1608Metric | R19 |
| 2 | RC0603JR-075K1L 5.1k | R_0603_1608Metric | R24, R25 |
| 1 | RC0603FR-0710KL 100k | R_0402_1005Metric | R32 |
| 1 | 3.24k | R_0603_1608Metric | R35 |
| 1 | 10k | R_0603_1608Metric | R36 |
Budgetcan g4-hw design files
The KiCad project lives in the dbstephan/budgetcan-g4-hw repository on GitHub; these links point at the commit this page was built from.
- Layoutbudgetcan_g4_hw.kicad_pcb
- Schematicbudgetcan_g4_hw.kicad_sch
Budgetcan g4-hw: common questions
What microcontroller does the Budgetcan g4-hw use?
The Budgetcan g4-hw is built around the STM32G473CBTx, from the STM32 family.
How big is the Budgetcan g4-hw PCB?
The Budgetcan g4-hw measures 76.2 × 38.1 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Budgetcan g4-hw?
92 components, from 53 distinct parts. The full bill of materials is listed on this page.
Where can I download the Budgetcan g4-hw design files?
From the dbstephan/budgetcan-g4-hw repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Budgetcan g4-hw design in my own project?
Yes, under the terms of its MIT license, which dbstephan chose for the repository.
Can I test firmware for the Budgetcan g4-hw without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug STM32 firmware against it before you order a PCB.
Similar boards
STM32
LumenPnP Motherboard
opulo-inc
149 × 95 mm296 parts4LCC-BY-SA-4.03.7kSTM32
Type g
google
169 × 30 mm24 parts2LApache-2.02.9kSTM32
Main panel
google
234 × 84 mm26 parts4LApache-2.02.9kSTM32
Base
google
52.3 × 52.3 mm36 parts2LApache-2.02.9kSTM32
Type a
google
150 × 30 mm14 parts2LApache-2.02.9kSTM32
Type c
google
188 × 30 mm17 parts2LApache-2.02.9k