4 open source boards using the AP22804AW5
Real designs built with the AP22804AW5, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
STM32
XYmatics-E64
XyrusB2010
191.3 × 97.8 mm277 parts2LNo license0STM32
Jfox fmu
Jettanakorn
100 × 80 mm125 parts6LNo license0STM32
Budgetcan g4-hw
dbstephan
76.2 × 38.1 mm92 parts4LMIT0ESP32
Pixel snap voice
zeeman-effect
64 × 86 mm55 parts4LNo license0
The AP22804AW5 in open source designs
The gallery holds 4 open source boards using the AP22804AW5 from 4 GitHub repositories; a typical one measures about 88.1 × 83 mm and carries around 109 components.
75% use four copper layers or more, and 25% carry an open source license.
The most starred is XYmatics-E64 by XyrusB2010.
Parts used alongside the AP22804AW5
What boards using the AP22804AW5 are built for
AP22804AW5: common questions
Where can I find a AP22804AW5 reference design?
Each of the 4 boards on this page is a real design using the AP22804AW5. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What parts are used alongside the AP22804AW5?
The USBLC6-2SC6, AP2112K-3.3 and TJA1051T-3 appear in the most repositories here.
Which microcontrollers do boards using the AP22804AW5 use?
Most are built on STM32 (3) and ESP32 (1).
How big is a typical board using the AP22804AW5?
The median is 88.1 × 83 mm, and 25% are two-layer designs.
What is the most popular open source board using the AP22804AW5?
By GitHub stars, XYmatics-E64 by XyrusB2010, with 0 stars.
Can I simulate one of these boards using the AP22804AW5 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.