Smart-Home-Automation-Controller
dhanush-darpan·Smart-Home-Automation-Controller-PCB
About the Smart-Home-Automation-Controller PCB
Smart-Home-Automation-Controller is an open source ESP32 PCB design by dhanush-darpan, published on GitHub. It is a 2-layer board measuring 168 × 61 mm, with 68 components from 15 distinct parts.
Its main chip is the ESP-WROOM-02, from the ESP32 family. Other key parts include the ATmega328P-P, TXS0101DBV and PC817. By type, the board carries 20 resistors, 14 diodes, 10 ICs, 8 connectors, 6 transistors and 6 relays.
It belongs with the iot & wireless designs in this gallery.
From the project
KiCad project — PCB design for a Smart Home Automation Controller.
KiCad project — PCB design for a Smart Home Automation Controller.
This repository contains the KiCad project files, PCB layout, schematic, and a printable PDF of the board for the Smart Home Automation Controller. The design includes relay driver circuits and Wi‑Fi communication components (see schematic for detailed parts and net connections).
This README explains the project structure, how to open and build the board in KiCad, fabrication export steps, and housekeeping notes for contributors.
Main components on the Smart-Home-Automation-Controller
Smart-Home-Automation-Controller bill of materials (BOM)
68 components, 15 distinct parts.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | ATmega328P-P | DIP-28_W7.62mm | U1 |
| 1 | ESP-WROOM-02 | ESP-WROOM-02 | U2 |
| 2 | TXS0101DBV | SOT-23-6 | U3, U4 |
| 6 | PC817 | DIP-4_W7.62mm | U5, U6, U7, U8, U9, U10 |
| 6 | MMBTA06 | SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6 |
| 6 | NC COM NO | JST_NV_B03P-NV_1x03_P5.00mm_Vertical | J1, J2, J3, J4, J5, J6 |
| 2 | Power | JST_NV_B02P-NV_1x02_P5.00mm_Vertical | J7, J8 |
| 6 | G5LE-1 | Relay_SPDT_Omron-G5LE-1 | K1, K2, K3, K4, K5, K6 |
| 2 | Switch | SW_SPST_EVQPE1 | SW1, SW2 |
| 6 | 1N4007 | D_1206_3216Metric | D1, D2, D3, D4, D5, D6 |
| 8 | LED | LED_0201_0603Metric | D7, D8, D9, D10, D11, D12, D13, D14 |
| 2 | 100nF | C_0201_0603Metric_Pad0.64x0.40mm_HandSolder | C1, C2 |
| 6 | 1K | R_0201_0603Metric | R1, R2, R3, R4, R5, R6 |
| 8 | 680E | R_0201_0603Metric | R7, R8, R9, R10, R11, R12, R13, R14 |
| 6 | 220E | R_0201_0603Metric | R15, R16, R17, R18, R19, R20 |
Smart-Home-Automation-Controller design files
The KiCad project lives in the dhanush-darpan/Smart-Home-Automation-Controller-PCB repository on GitHub; these links point at the commit this page was built from.
Smart-Home-Automation-Controller: common questions
What microcontroller does the Smart-Home-Automation-Controller use?
The Smart-Home-Automation-Controller is built around the ESP-WROOM-02, from the ESP32 family.
How big is the Smart-Home-Automation-Controller PCB?
The Smart-Home-Automation-Controller measures 168 × 61 mm, has 2 copper layers and is 1.6 mm thick.
How many components are on the Smart-Home-Automation-Controller?
68 components, from 15 distinct parts. The full bill of materials is listed on this page.
Where can I download the Smart-Home-Automation-Controller design files?
From the dhanush-darpan/Smart-Home-Automation-Controller-PCB repository on GitHub, which has the KiCad layout and the schematic; the links under Design files point to each one.
Can I use the Smart-Home-Automation-Controller design in my own project?
The repository has no license, so all rights stay with dhanush-darpan. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Smart-Home-Automation-Controller without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k