Rc wow
dipa-cotton·rc-wow·src/kicad production files/RC Car Controller.kicad_pcb
About the Rc wow PCB
Rc wow is an open source ESP32 PCB design by dipa-cotton, published on GitHub. It is a 4-layer board measuring 62.4 × 81.6 mm, with 51 components from 32 distinct parts.
Its main chip is the ESP32-S3-WROOM-1, from the ESP32 family. Other key parts include the 0900DP15A2450E, LR1121IMLTRT, PE4259 and XC6220B331MR. By type, the board carries 14 capacitors, 13 resistors, 7 ICs, 5 connectors, 2 crystals and 2 switches.
It belongs with the rf & radio and displays & leds designs in this gallery.
Main components on the Rc wow
Rc wow bill of materials (BOM)
51 components, 32 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | 0900DP15A2450E | 0900DP15A2450E | IC1 |
| 1 | LR1121IMLTRT | QFN32_5X5_MLP_SEM | U1 |
| 1 | ESP32-S3-WROOM-1 | ESP32-S3-WROOM-1 | U2 |
| 3 | PE4259 | SOT-363_SC-70-6 | U5, U7, U8 |
| 1 | XC6220B331MR | SOT-23-5 | U6 |
| 1 | PMOS | SOT-23_Handsoldering | Q1 |
| 1 | CRYSTAL_GND24 Crystal_GND24 | Crystal_SMD_SeikoEpson_FA128-4Pin_2.0x1.6mm | Y1 |
| 1 | Crystal | Crystal_SMD_Qantek_QC5CB-2Pin_5x3.2mm | Y2 |
| 1 | USB_C_RECEPTACLE_USB2.0_14P USB_C_Receptacle_USB2.0_14P | USB_C_Receptacle_GCT_USB4085 | J1 |
| 1 | CONN_01X03_PIN Conn_01x03_Pin | PinHeader_1x03_P2.54mm_Vertical | J2 |
| 1 | CONN_01X04_PIN Conn_01x04_Pin | PinHeader_1x04_P1.00mm_Vertical | J3 |
| 1 | Conn_Coaxial | BNC_TEConnectivity_1478204_Vertical | J4 |
| 1 | Micro_SD_Card | microSD_HC_Wuerth_693072010801 | J7 |
| 1 | C | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | 10µF1 |
| 1 | Battery | BatteryHolder_Keystone_2462_2xAA | BT1 |
| 2 | 0900FM15K0039 | Balun_Johanson_0900FM15K0039 | FL2, FL3 |
| 2 | SW_Push | SW_Push_1P1T_NO_CK_PTS125Sx43SMTR | SW1, SW2 |
| 1 | D_Schottky | D_A-405_P10.16mm_Horizontal | D1 |
| 1 | FerriteBead | LairdTech_28C0236-0JW-10 | FB1 |
| 1 | 15µH | PinHeader_1x02_P1.00mm_Vertical | L1 |
Show 12 more
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 4 | 100NF 100nf | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C1, C3, C4, C15 |
| 1 | 1µF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C2 |
| 1 | 4.7 µF | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C5 |
| 3 | C | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C6, C7, C8 |
| 3 | 39PF 39pf | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C13, C14 |
| 1 | 12 pf | C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C10 |
| 1 | C_Polarized | C_Radial_D6.3mm_H7.0mm_P2.50mm | C12 |
| 2 | 5.1K | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1, R2 |
| 2 | 10K 10k | R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R3, R4 |
| 3 | 10D | R_0603_1608Metric | R5, R14, R15 |
| 1 | 100K | R_0603_1608Metric | R6 |
| 5 | 10K | R_0603_1608Metric | R8, R9, R10, R11, R12 |
Rc wow design files
The KiCad project lives in the dipa-cotton/rc-wow repository on GitHub; these links point at the commit this page was built from.
Rc wow: common questions
What microcontroller does the Rc wow use?
The Rc wow is built around the ESP32-S3-WROOM-1, from the ESP32 family.
How big is the Rc wow PCB?
The Rc wow measures 62.4 × 81.6 mm, has 4 copper layers and is 1.6 mm thick.
How many components are on the Rc wow?
51 components, from 32 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the Rc wow design files?
From the dipa-cotton/rc-wow repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the Rc wow design in my own project?
The repository has no license, so all rights stay with dipa-cotton. Use it as a reference, and ask the author before reusing the design.
Can I test firmware for the Rc wow without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug ESP32 firmware against it before you order a PCB.
Similar boards
ESP32
OSO-BOOK-B1
joeycastillo
85 × 115 mm65 parts2LCC-BY-SA-4.08.1kESP32
Powertrain
byrantech
64 × 45.4 mm171 parts4LMIT4.3kESP32
Badge
atopile
56.3 × 39 mm239 parts4LMIT4.0kESP32
Esp32 minimal
atopile
36.2 × 26.8 mm20 parts2LMIT4.0kESP32
Racer
StuckAtPrototype
36 × 50.2 mm70 parts4LApache-2.03.8kESP32
Controller
StuckAtPrototype
29 × 74 mm58 parts4LApache-2.03.8k