11 open source boards using the LR1121IMLTRT

Real designs built with the LR1121IMLTRT, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

11 boardsClear filters|Most starred

How designs wire the LR1121IMLTRT

Read from the KiCad layouts of 6 open source designs, one per repository: what each pin of the LR1121IMLTRT connects to, and the resistors, capacitors and other passives placed on it.

  • The VR_PA_1 pin has a capacitor to GND on 6 of 6 designs, most often 2.2 nF (then 47 pF).
  • The VREG_12 pin has a inductor on 6 of 6 designs, most often 10 µH (then 15 µH).
  • The VREG_12 pin has a capacitor to GND on 6 of 6 designs, most often 470 nF (then 4.7 µF).
  • The DCC_SW_14 pin has a inductor on 6 of 6 designs, most often 10 µH (then 15 µH).
VR_PA_1pin 1Connected to: Signal 100%
  • Capacitor to GND on 100% · 2.2 nF (5), 47 pF (5), 100 nF (1)
  • Inductor on 83% · 47 nH (5)
  • Series resistor on 83% · 200 Ω (5)
VBAT_RF_2pin 2Connected to: 3.3V 100%
  • Decoupling capacitor on 83% · 100 nF (13), 47 pF (5), 1 µF (5)
VTCXO_3pin 3Connected to: Not connected 83% · 3.3V 17%
XTA_4pin 4Connected to: Signal 100%
  • Series resistor on 83% · 220 Ω (6)
XTB_5pin 5Connected to: Not connected 80% · a signal 20%
NRESET_6pin 6Connected to: The microcontroller 100%
  • Pull-up to 3.3V on 83% · 10 kΩ (5)
32K_P/DIO11_7pin 7Connected to: Not connected 83% · a signal 17%
32K_N/DIO10_8pin 8Connected to: Not connected 83% · a signal 17%
VREG_12pin 12Connected to: Signal 100%
  • Inductor on 100% · 10 µH (6), 15 µH (1)
  • Capacitor to GND on 100% · 470 nF (6), 4.7 µF (1), 100 nF (1)
GND_13pin 13Connected to: GND 100%
DCC_SW_14pin 14Connected to: Signal 100%
  • Inductor on 100% · 10 µH (6), 15 µH (3)
VBAT_15pin 15Connected to: 3.3V 100%
  • Decoupling capacitor on 100% · 100 nF (17), 1 µF (6), 10 µF (5)
  • Inductor on 33% · 2 nH (2)
DNC_16pin 16Connected to: Not connected 100%
DNC_17pin 17Connected to: Not connected 100%
DNC_18pin 18Connected to: Not connected 100%
DIO6_19pin 19Connected to: RFX2401C 83% · not connected 17%
  • Resistor to GND on 83% · 100 kΩ (5)
DIO5_20pin 20Connected to: RFX2401C 83% · not connected 17%
  • Pull-up to 3.3V on 83% · 100 kΩ (5)
DNC_27pin 27Connected to: Not connected 100%
DNC_28pin 28Connected to: Not connected 100%
RFO_HP_LF_32pin 32Connected to: Signal 100%
  • Inductor on 83% · 47 nH (6)
  • Series resistor on 83% · 200 Ω (6)
EP_33pin 33Connected to: GND 100%

12 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include OpenAIO by OpenDrone-hw, OpenRX-Gemini by OpenDrone-hw, OpenRX-Mono by OpenDrone-hw and OpenAIO by tetraethylmethane.

The LR1121IMLTRT in open source designs

The gallery holds 11 open source boards using the LR1121IMLTRT from 6 GitHub repositories; a typical one measures about 17 × 17.3 mm and carries around 85 components.

100% use four copper layers or more, and 64% carry an open source license.

The most starred is OpenAIO by OpenDrone-hw.

Microcontrollers on boards using the LR1121IMLTRT

LR1121IMLTRT: common questions

Where can I find a LR1121IMLTRT reference design?

Each of the 11 boards on this page is a real design using the LR1121IMLTRT. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

How is the LR1121IMLTRT VR_PA_1 pin connected?

The VR_PA_1 pin has a capacitor to GND on 6 of 6 designs, most often 2.2 nF (then 47 pF). Counted from the KiCad layouts of 6 open source designs using the LR1121IMLTRT.

How is the LR1121IMLTRT VREG_12 pin connected?

The VREG_12 pin has a inductor on 6 of 6 designs, most often 10 µH (then 15 µH). Counted from the KiCad layouts of 6 open source designs using the LR1121IMLTRT.

How is the LR1121IMLTRT DCC_SW_14 pin connected?

The DCC_SW_14 pin has a inductor on 6 of 6 designs, most often 10 µH (then 15 µH). Counted from the KiCad layouts of 6 open source designs using the LR1121IMLTRT.

What parts are used alongside the LR1121IMLTRT?

The RFX2401C, SKY13373-460LF, TLV75533PDQNR, ESP32-C3 and TS2306A 240gf MSM 9 appear in the most repositories here.

Which microcontrollers do boards using the LR1121IMLTRT use?

Most are built on ESP32 (11).

How big is a typical board using the LR1121IMLTRT?

The median is 17 × 17.3 mm, and 0% are two-layer designs.

What is the most popular open source board using the LR1121IMLTRT?

By GitHub stars, OpenAIO by OpenDrone-hw, with 5 stars.

Can I simulate one of these boards using the LR1121IMLTRT before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part