ICEGenius
dirkt68·iCEGenius·board/esp32-current/iCEGenius.kicad_pcb
About the ICEGenius PCB
ICEGenius is an open source FPGA PCB design by dirkt68, published on GitHub under the MIT license. It is a 4-layer board measuring 21.8 × 44.6 mm, with 54 components from 20 distinct parts.
Its main chip is the ICE40LP384-SG32, from the FPGA family. Other key parts include the MCP1727-3302xMF, MIC5365-1.2YC5, ESP32-C6FH4, W25Q80DVSNIG and PL133-27GC-R. By type, the board carries 30 capacitors, 8 resistors, 6 ICs, 5 diodes, 3 connectors and 1 crystal.
It belongs with the dev boards & breakouts designs in this gallery.
From the project
A low cost, low power, minimally sized FPGA development board based on the iCE40 FPGA.
STILL A WORK IN PROGRESS, DONT USE UNTIL THIS MESSAGE IS GONE
A low cost, low power, minimally sized FPGA development board based on the iCE40LP384 FPGA.
Hobbyist grade FPGAs are in relatively short supply and are typically complicated for new users to dive into. Even the cheapest ones still range in the 30-40 dollar territory, which can be prohibitively expensive for institutions or groups without a large budget. To fill this void, the iCEGenius has been developed as an educational tool for use in learning introductory to intermediate Verilog on a real hardware target.
Main components on the ICEGenius
ICEGenius bill of materials (BOM)
54 components, 20 distinct parts — part numbers from the project's BOM.
| Qty | Part | Footprint | Refs |
|---|---|---|---|
| 1 | MCP1727-3302xMF | DFN-8-1EP_3x3mm_P0.65mm_EP1.55x2.4mm | U1 |
| 1 | MIC5365-1.2YC5 | SOT-353_SC-70-5 | U2 |
| 1 | ESP32-C6FH4 | QFN50P500X500X90-33N | U3 |
| 1 | W25Q80DVSNIG | SOIC127P600X175-8N | U4 |
| 1 | ICE40LP384-SG32 | HVQFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U5 |
| 1 | PL133-27GC-R | SON40P200X130X60-7N-D | U6 |
| 1 | ECS-TXO-32CSMV-400-BN-TR | ECSTXO32CSMV400BNTR | Y1 |
| 1 | USB4105-GF-A-060 | USB_C_Receptacle_GCT_USB4105-xx-A_16P_TopMnt_Horizontal | J1 |
| 1 | LEFT | PinSocket_1x10_P2.54mm_Vertical | J2 |
| 1 | RIGHT | PinSocket_1x10_P2.54mm_Vertical | J3 |
| 1 | 1N4148W-TP | D_SOD-123 | D1 |
| 3 | ESD321 | D_0402_1005Metric_TVS | D2, D3, D4 |
| 1 | FPGA_DONE_G | LED_0603_1608Metric | D5 |
| 1 | LQG15HZ2N0B02D | L_0402_1005Metric | L1 |
| 13 | 1u | C_0402_1005Metric | C1, C3, C4, C5, C8, C13, C17, C19 +5 |
| 2 | 10u | C_0402_1005Metric | C2, C7 |
| 1 | 10n | C_0201_0603Metric | C6 |
| 14 | 100n | C_0201_0603Metric | C9, C10, C11, C12, C14, C15, C16, C18 +6 |
| 2 | 5k1 | R_0402_1005Metric | R1, R2 |
| 6 | 10k | R_0402_1005Metric | R3, R4, R5, R6, R7, R8 |
ICEGenius design files
The KiCad project lives in the dirkt68/iCEGenius repository on GitHub; these links point at the commit this page was built from.
ICEGenius: common questions
What microcontroller does the ICEGenius use?
The ICEGenius is built around the ICE40LP384-SG32, from the FPGA family.
How big is the ICEGenius PCB?
The ICEGenius measures 21.8 × 44.6 mm, has 4 copper layers and is 1.5842 mm thick.
How many components are on the ICEGenius?
54 components, from 20 distinct parts, with part numbers taken from the project's own BOM. The full bill of materials is listed on this page.
Where can I download the ICEGenius design files?
From the dirkt68/iCEGenius repository on GitHub, which has the KiCad layout, the schematic and the BOM; the links under Design files point to each one.
Can I use the ICEGenius design in my own project?
Yes, under the terms of its MIT license, which dirkt68 chose for the repository.
Can I test firmware for the ICEGenius without the hardware?
Yes. HardLabs builds a simulation of the board from its netlist and BOM, so you can run and debug FPGA firmware against it before you order a PCB.
Similar boards
FPGA
Base board
GlasgowEmbedded
80 × 49 mm222 parts4L0BSD2.2kFPGA
Thunderscope Rev5.3
EEVengers
122.5 × 103.5 mm817 parts6LMIT1.3kFPGA
Usb sniffer
ataradov
58.2 × 38.1 mm86 parts2LBSD-3-Clause1.3kFPGA
Tomu, I'm
theacodes
13 × 9.4 mm40 parts4LMIT1.1kFPGA
Icepi zero
cheyao
65 × 30 mm143 parts4LSHL-2.1865FPGA
Gcvideo
ikorb
49 × 30 mm44 parts4LNo license765