5 open source boards using the ICE40LP384-SG32
Real designs built with the ICE40LP384-SG32, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.
FPGA
Dpsgo
dpiegdon
140 × 100 mm149 parts4LNo license9FPGA
GLOWCOST-2v2-mppcInterface-
tharinduudu
65 × 56.5 mm194 parts6LNo license1STM32
NexRx
alanmimms
99 × 99 mm356 parts6LMIT0FPGA
ICEGenius
dirkt68
21.8 × 44.6 mm54 parts4LMIT0FPGA
Uart384
dpiegdon
54.1 × 23.5 mm41 parts2LNo license0
How designs wire the ICE40LP384-SG32
Read from the KiCad layouts of 5 open source designs, one per repository: what each pin of the ICE40LP384-SG32 connects to, and the resistors, capacitors and other passives placed on it.
- The VCCIO_2 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The VCC_SPI pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The VCCIO_1 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
- The VCC pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF).
| Pin | Connected to | Parts on the pin |
|---|---|---|
| GNDpin 3, 21, 33 | Connected to: GND 93% | — |
| VCCIO_3pin 4 | Connected to: 3.3V 80% · a signal 20% |
|
| VCCIO_2pin 9 | Connected to: 3.3V 100% |
|
| CRESET_Bpin 10 | Connected to: A connector 40%, the microcontroller 40% |
|
| CDONEpin 11 | Connected to: A connector 40% |
|
| IOB_24_SDOpin 12 | Connected to: A connector 40% |
|
| IOB_25_SDIpin 13 | Connected to: A connector 40%, the microcontroller 40% |
|
| IOB_27_SSpin 14 | Connected to: A connector 40%, the microcontroller 40% |
|
| IOB_26_SCKpin 15 | Connected to: A connector 40%, the microcontroller 40% |
|
| VCC_SPIpin 16 | Connected to: 3.3V 100% |
|
| VCCIO_1pin 17 | Connected to: 3.3V 100% |
|
| VPP_2V5pin 24 | Connected to: 3.3V 80% · a signal 20% |
|
| VCCpin 25 | Connected to: 1.2V 100% |
|
| IOT_47pin 27 | Connected to: Signal 80% · not connected 20% |
|
| VCCIO_0pin 28 | Connected to: 3.3V 100% |
|
| IOT_49_GBIN0pin 29 | Connected to: Signal 100% |
|
15 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Dpsgo by dpiegdon, GLOWCOST-2v2-mppcInterface- by tharinduudu, NexRx by alanmimms and ICEGenius by dirkt68.
The ICE40LP384-SG32 in open source designs
The gallery holds 5 open source boards using the ICE40LP384-SG32 from 5 GitHub repositories; a typical one measures about 65 × 56.5 mm and carries around 149 components.
80% use four copper layers or more, and 40% carry an open source license.
The most starred is Dpsgo by dpiegdon.
Parts used alongside the ICE40LP384-SG32
What boards using the ICE40LP384-SG32 are built for
ICE40LP384-SG32: common questions
Where can I find a ICE40LP384-SG32 reference design?
Each of the 5 boards on this page is a real design using the ICE40LP384-SG32. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.
What decoupling capacitors do designs use on the ICE40LP384-SG32 VCCIO_2 pin?
The VCCIO_2 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the ICE40LP384-SG32.
What decoupling capacitors do designs use on the ICE40LP384-SG32 VCC_SPI pin?
The VCC_SPI pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the ICE40LP384-SG32.
What decoupling capacitors do designs use on the ICE40LP384-SG32 VCCIO_1 pin?
The VCCIO_1 pin has a decoupling capacitor on 5 of 5 designs, most often 100 nF (then 1 µF). Counted from the KiCad layouts of 5 open source designs using the ICE40LP384-SG32.
Which microcontrollers do boards using the ICE40LP384-SG32 use?
Most are built on FPGA (4) and STM32 (1).
How big is a typical board using the ICE40LP384-SG32?
The median is 65 × 56.5 mm, and 20% are two-layer designs.
What is the most popular open source board using the ICE40LP384-SG32?
By GitHub stars, Dpsgo by dpiegdon, with 9 stars.
Can I simulate one of these boards using the ICE40LP384-SG32 before building it?
Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.