16 open source boards using the W25Q80DVSNIG

Real designs built with the W25Q80DVSNIG, from public GitHub projects: a quick way to see how others power, decouple and connect it. Each board comes with its KiCad files, full parts list and a render — and you can simulate its firmware on HardLabs.

16 boardsClear filters|Most starred

How designs wire the W25Q80DVSNIG

Read from the KiCad layouts of 12 open source designs, one per repository: what each pin of the W25Q80DVSNIG connects to, and the resistors, capacitors and other passives placed on it.

  • The CS pin has a pull-up to 3.3V on 10 of 12 designs, most often 10 kΩ (then 1 kΩ).
  • The VDD pin has a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 22 µF).
  • The CS pin has a series resistor on 5 of 12 designs, most often 1 kΩ (then 3.3 kΩ).
CSpin 1Connected to: The microcontroller 50%, a connector 33%
  • Pull-up to 3.3V on 83% · 10 kΩ (8), 1 kΩ (1), 100 kΩ (1)
  • Series resistor on 42% · 1 kΩ (3), 3.3 kΩ (1), 0 Ω (1)
WPpin 3Connected to: The microcontroller 33%
  • Pull-up to 3.3V on 33% · 10 kΩ (3), 100 kΩ (1)
VSSpin 4Connected to: GND 100%
HOLDpin 7Connected to: The microcontroller 33%
  • Pull-up to 3.3V on 33% · 10 kΩ (3), 100 kΩ (1)
VDDpin 8Connected to: 3.3V 83% · a signal 17%
  • Decoupling capacitor on 83% · 100 nF (15), 22 µF (3), 10 µF (1)
EPpin 9Connected to: GND 100%

3 more pins vary from design to design. Connections count pins, parts count designs; values in brackets are how many parts had that value. Designs read include Kicad cpu board smt by matthewcieplak, ADCS by onionharvester, ADCS by stanford-ssi and Poe usb c pd converter by antmicro.

The W25Q80DVSNIG in open source designs

The gallery holds 16 open source boards using the W25Q80DVSNIG from 12 GitHub repositories; a typical one measures about 90.2 × 95.9 mm and carries around 179 components.

94% use four copper layers or more, and 38% carry an open source license.

The most starred is Kicad cpu board smt by matthewcieplak.

Microcontrollers on boards using the W25Q80DVSNIG

W25Q80DVSNIG: common questions

Where can I find a W25Q80DVSNIG reference design?

Each of the 16 boards on this page is a real design using the W25Q80DVSNIG. Open one to see how it is wired up, with the full BOM, a render of the layout and links to its KiCad files.

What pull-up resistor is used on the W25Q80DVSNIG CS pin?

The CS pin has a pull-up to 3.3V on 10 of 12 designs, most often 10 kΩ (then 1 kΩ). Counted from the KiCad layouts of 12 open source designs using the W25Q80DVSNIG.

What decoupling capacitors do designs use on the W25Q80DVSNIG VDD pin?

The VDD pin has a decoupling capacitor on 10 of 12 designs, most often 100 nF (then 22 µF). Counted from the KiCad layouts of 12 open source designs using the W25Q80DVSNIG.

What parts are used alongside the W25Q80DVSNIG?

The ADM1176-1ARMZ-R7, TPS54226PWPR, BQ25883RGER, EP2W+ and PE014006 TE appear in the most repositories here.

Which microcontrollers do boards using the W25Q80DVSNIG use?

Most are built on RP2040/RP2350 (6), FPGA (3), Microchip SAM (3) and AVR/Arduino (1).

How big is a typical board using the W25Q80DVSNIG?

The median is 90.2 × 95.9 mm, and 6% are two-layer designs.

What is the most popular open source board using the W25Q80DVSNIG?

By GitHub stars, Kicad cpu board smt by matthewcieplak, with 171 stars.

Can I simulate one of these boards using the W25Q80DVSNIG before building it?

Yes. HardLabs turns a board's netlist and BOM into a working simulation, so you can boot and test firmware against it with no hardware on your desk.

Browse boards by part